Tektronix Camcorder 2200 Benutzerhandbuch
2-67
Wipe Subpanel
LEARN USER WIPE
– The six
USER 1 - USER 6
wipe buttons let you
learn a wipe effect into memory and then recall it all at once.
Everything on the Wipe Subpanel is learned except the delegate
buttons. Upon recall, the stored wipe parameters are transferred
to the delegated wipe generator. This shared system allows you to
transfer wipe effects from one wipe generator to another.
Everything on the Wipe Subpanel is learned except the delegate
buttons. Upon recall, the stored wipe parameters are transferred
to the delegated wipe generator. This shared system allows you to
transfer wipe effects from one wipe generator to another.
To store a wipe setup, press the
LEARN USER WIPE
button,
followed by any one of the six
USER
buttons. The current wipe
pattern selection and all modifiers will be memorized into the
USER
register. To recall the wipe effect later, press that
USER
button. After a
USER
button is pressed, either for a learn or recall
operation, the button remains lit as a reminder that it was the last
one used.
one used.
USER WIPE UNDO
allows an accidental
USER
wipe recall or learn
to be “un-done.” When undoing a recall, pressing this button
restores the panel to the state that existed before the last learn;
when undoing a learn, it restores the user register to its previous
state (the control panel is not affected).
restores the panel to the state that existed before the last learn;
when undoing a learn, it restores the user register to its previous
state (the control panel is not affected).
Wipe Controls
Pressing the
SOFT
button toggles the wipe edge softness on and
off. When the button is illuminated, wipe edge softness can be
adjusted with the
adjusted with the
(SOFTNESS)
knob.
The
(SOFTNESS)
knob controls the amount of wipe edge softness
when
SOFT
is on. A setting of full counter-clockwise rotation
causes zero softness, while full clockwise rotation causes
maximum softness.
maximum softness.
User 3 User 4
User 1 User 2
User 5 User 6
Learn
User
Wipe
User
Wipe
User
Wipe
Undo
Wipe
Undo
Soft
Softness