Alloy Computer Products POE120 Series Benutzerhandbuch

 

The POE120 Series IEEE 802.3u compliant media converters support two 
types of media 10/100 Base-TX and 100Base-FX. With LFP (Link Fault 
Propagation) support it allows the administrator to easily diagnose link faults 
on their network. If the Copper or Fibre link fails, the converter forces the link 
status of the connecting device to also fail. 

The POE120 Series media converters are fully compliant to the IEEE 802.3af 
standard. The converters advanced auto-sensing algorithm allows the unit to 
draw power from any IEEE 802.3af Power Sourcing Equipment (PSE) device 
(POE100 Series Converter, or PoE Switch) or Power over Ethernet Injector. It 
also supports high levels of safety support with short circuit protection and 
power-in auto-detection. The POE120 series converters can be powered from 
either a standard plug pack or a PSE device. 
 

 

 

POE120 Series 

60mA@-48VDC over Cat.5 

 

ST/SC Multimode 2Km 

1310nm 

SC.S05/S20/S40/S60Km Single Mode 

1310nm 

SC.S80/S100Km Single Mode 

1550nm 

 

TX (Transmit) 1310nm 

1310nm Single Mode 20Km 
 

RX (Receive) 1550nm 
TX (Transmit) 1550nm 

1550nm Single Mode 20Km 

RX (Receive) 1310nm 

 
Note: 
The 1310nm and 1550nm models must be installed in pairs, 
i.e., install 1310nm model at one end and the 1550nm model at the other end.  
 

Before you start installing the POE converter, please verify that the package 
contains the following items. 
 

-  The POE120 Series Converter 
-  CD containing this manual 

 
Please notify your sales representative if any of the above items are missing 
or damaged.