Allied International D-07646 Stadtroda/Germany Benutzerhandbuch
AVT camera cleaning instructions
Hardware Installation Guide V2.0.0
24
3.
If the impurity is neither on the lens nor the IR cut filter/protection
glass, it is probably on the sensor.
glass, it is probably on the sensor.
Cleaning Instructions
Perform all cleaning operations (lenses, filter/protection glass, sensor in a
dust-free clean-room. The optical components are very fragile so it is impor-
tant to avoid touching them with your fingers or any hard material.
dust-free clean-room. The optical components are very fragile so it is impor-
tant to avoid touching them with your fingers or any hard material.
1.
Unplug the camera from any power supply before cleaning.
2.
Apply a small amount of optics cleaner (60% ethyl alcohol, 40% ether)
to clean, new lens cleaning tissue.
to clean, new lens cleaning tissue.
Acceptable material includes medical-grade sterile optical cotton, or
lens tissue that is chemically pure and free from silicones and other
additives.
– Do not use cosmetic cotton.
– Do not use consumer eyeglass cleaning cloths pre-treated with sili-
lens tissue that is chemically pure and free from silicones and other
additives.
– Do not use cosmetic cotton.
– Do not use consumer eyeglass cleaning cloths pre-treated with sili-
con.
Figure 4: Removing IR cut filter/protection glass using special tool (E902001)
Figure 5: Medical-grade sterile optical cotton