Maxon Telecom Modem MM-6280IND Benutzerhandbuch

 

 

HSDPA Standard At Commands        Page 18 of 60                             Version 1.2 

 

 

ITU-T Recommendation V.250 [14] includes "Generic DCE Control" commands with the prefix +G. 

These commands are for the identification of the TA. Four of those commands are adapted here to be 

the identification commands of the MT. Syntax is otherwise similar but the prefix is +CG. TIA 

IS-99 [15] uses same commands for base station identification. 

+CMUX 

   Multiplexing 

mode 

Not 

supported 

Execution command causes the TA to return one or more lines of information text <manufacturer>, 

determined by the MT manufacturer, which is intended to permit the user of the TA to identify the 

manufacturer of the MT to which it is connected to. Typically, the text will consist of a single line 

containing the name of the manufacturer, but manufacturers may choose to provide more information 

if desired.  

+CGMI <manufacturer> 

+CME ERROR: <err> 

+CGMI=?  

value 

<manufacturer>: the total number of characters, including line terminators, in the 

information text shall not exceed 2048 characters 

Execution command causes the TA to return one or more lines of information text <model>, 

determined by the MT manufacturer, which is intended to permit the user of the TA to identify the 

specific model of the MT to which it is connected to. Typically, the text will consist of a single line 

containing the name of the product, but manufacturers may choose to provide more information if 

desired.