Maxon Telecom Modem MM-6280IND Benutzerhandbuch

 

 

HSDPA Standard At Commands        Page 52 of 60                             Version 1.2 

 

 

The test command returns a list of <cid>s associated with active contexts 

+CGEQNEG 
=[<cid>[,<cid>
[,…]]] 

+CGEQNEG: <cid>, <Traffic class> ,<Maximum bitrate UL>, 

<Maximum bitrate DL> ,<Guaranteed bitrate UL>, <Guaranteed 

bitrate DL> ,<Delivery order> ,<Maximum SDU size> ,<SDU error 

ratio> ,<Residual bit error ratio> ,<Delivery of erroneous 

SDUs> ,<Transfer delay> ,<Traffic handling priority> 

[<CR><LF>+CGEQNEG: <cid>, <Traffic class> ,<Maximum bitrate 

UL>, <Maximum bitrate DL> ,<Guaranteed bitrate UL>, 

<Guaranteed bitrate DL> ,<Delivery order> ,<Maximum SDU size> 

,<SDU error ratio> ,<Residual bit error ratio> ,<Delivery of 

erroneous SDUs> ,<Transfer delay> ,<Traffic handling 

priority> 

[…]] 

+CGEQNEG=? 

+CGEQNEG: (list of <cid>s associated with active contexts) 

Value

 

<cid>

: a numeric parameter which specifies a particular PDP context definition (see 

+CGDCONT and +CGDSCONT commands). 

The following parameters are defined in 3GPP TS 23.107 [46] - 

<Traffic class>:

 a numeric parameter that indicates the type of application for 

which the UMTS bearer service is optimised. 
0 - conversational 
1 - streaming 
2 - interactive 
3 - background 
Other values are reserved. 

<Maximum bitrate UL>:

 a numeric parameter that indicates the maximum 

number of kbits/s delivered to UMTS (up-link traffic) at a SAP. As an example a 
bitrate of 32kbit/s would be specified as '32' (e.g. +CGEQNEG:…,32, …) (refer TS 
24.008 [8] subclause 10.5.6.5). 

<Maximum bitrate DL>:

 a numeric parameter that indicates the maximum 

number of kbits/s delivered by UMTS (down-link traffic) at a SAP As an example a 
bitrate of 32kbit/s would be specified as '32' (e.g. +CGEQNEG:…,32, …) (refer TS 
24.008 [8] subclause 10.5.6.5). 

<Guaranteed bitrate UL>:

 a numeric parameter that indicates the guaranteed 

number of kbits/s delivered to UMTS (up-link traffic) at a SAP (provided that there 
is data to deliver). As an example a bitrate of 32kbit/s would be specified as '32' 
(e.g. +CGEQNEG:…,32, …) (refer TS 24.008 [8] subclause 10.5.6.5). 

<Guaranteed bitrate DL>:

 a numeric parameter that indicates the guaranteed 

number of kbits/s delivered by UMTS (down-link traffic) at a SAP (provided that 
there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 
'32' (e.g. +CGEQNEG:…,32, …) (refer TS 24.008 [8] subclause 10.5.6.5). 

<Delivery order>:

 a numeric parameter that indicates whether the UMTS bearer 

shall provide in-sequence SDU delivery or not. 
0 - no  
1 - yes