GE GFDS260GFWW Spezifikationenblatt

Seite von 4
Special Installation Requirements:
Stacked Installation: 
Brackets for stacking dryer over washer are not included  
with the washer.  
Order part no. GEFLSTACK or part no. WE25X10018.
Alcove or Closet Installation: 
•  If your dryer is approved for installation in an alcove or closet, it 
will be stated on a label on the dryer back.
• The dryer MUST be exhausted to the outside.
•  Minimum clearances between dryer cabinet and adjacent walls 
or other surfaces are: 0" either side, 3" front and rear
•  Minimum vertical space from floor to overhead cabinets, 
ceilings, etc. is 52".
•  Closet doors must be louvered or otherwise ventilated and must 
contain a minimum of 60 sq. in. of open area equally distributed. 
If this closet contains both a washer and a dryer, doors 
must contain a minimum of 120 sq. in. of open area equally 
distributed.
•  No other fuel-burning appliance shall be installed in the same 
closet with a gas dryer.
Bathroom or Bedroom Installation: 
• The dryer MUST be exhausted to the outdoors.
•  The installation must conform with the local codes, or in the 
absence of local codes, with the National Electric Code and 
National Fuel Gas Code, ANSI Z223 for gas dryers.
Minimum Clearance other than Alcove or Closet Installations: 
•  Minimum clearances to combustible surfaces 0" both sides,  
3" rear.
For more information on venting kits and accessories,  
please call 1-800-GE-CARES.
Specification Created 2/13
360504
GFDS260GF/265GF 
GE
®
 8.1 cu. ft. capacity Front Load gas dryer with steam 
Stacked Dimensions (in inches) 
79.006
C
27.9
29.8
13
Pedestal Dimensions  (in inches) 
GFXP1308F
This optional 13" pedestal raises 
the door opening and height of 
the washer or dryer.
For answers to your Monogram,
®
 Cafe
 Series 
or
 
Profile
 Series appliance questions, visit 
our website at geappliances.com or call GE 
Answer Center
®
 service, 800.626.2000.
11.6
3.6
5.3
1.6