Sony PCNA-MR10 Handbuch
RoomLink User Guide
62
10 Use the up or down arrow keys on the Remote Commander to select a
Startup screen.
Highlight OK, then press the SELECT button.
Configuring your VAIO computer to start automatically
You can set your VAIO® computer to start automatically when RoomLink™
attempts to connect. This is a convenient feature to use when the computer is in a
different physical location from the network media receiver. This setting requires
your computer to be in Standby or hibernate mode.
attempts to connect. This is a convenient feature to use when the computer is in a
different physical location from the network media receiver. This setting requires
your computer to be in Standby or hibernate mode.
1
Click Start in the Windows taskbar and select Control Panel.
2
Click Performance and Maintenance, then click System.
The System Properties dialog box appears.
3
Click the Hardware tab, then click Device Manager.
The Device Manager window appears.
* The factory default setting is “Last Function Used.”
✍
The default startup screen setting is deleted if the AC power is interrupted.
✍
Starting RoomLink™ does not automatically start your VAIO computer.
System Properties