Psion Teklogix 8570 Benutzerhandbuch

DC Power Source

•

Inspect the fuse in the DC power cable. If the fuse is blown, replace it 
with an equivalent value. If fuses are blown repeatedly, the computer or 
pre-regulator should be serviced. 

6.3.6  I/O Ports

•

Verify that the BIOS setup for I/O is correct (see “Typical Resource Alloca-
tion For Windows 98” on page 40).

•

Make sure that the PCMCIA card and the I/O are not conflicting.

6.4  D: Install Partition

The files on the D: partition can be used to restore a corrupted operating system or 
C: drive without using any external storage devices. Keep in mind, however, that an 
external keyboard is required.

This procedure will only restore the C: drive to factory software; it will not restore 
data or reload client applications.

•

Boot the unit into safe mode by pressing <F8> before Windows boots.

•

Select command prompt only.

•

Type d: to switch to the D drive.

•

Type Format C: to erase the entire contents of the C drive.

•

Once the drive has been formatted, type “cd win98” to switch to the Win98 
directory.

•

Follow Microsoft help to install Microsoft Windows 98.

Once Win98 is installed, the PCI, radio and touch screen drivers will need to be 
installed. “Software Loading/Installation Procedure” on page 77 describes the steps 
you must follow to complete this task.