Samsung 14021-1205 Benutzerhandbuch
E
19
4. Operation Function Instruction
!
INITIAL STATUS
●
If you turn on this monitor, it search cameras.
●
If all cameras weren't connected to monitor, this screen display channel 1.
@
SEQUENTIAL SWITCHING MODE
●
Please press AUTO button, the monitor goes to sequential switching mode and the yellow
LED lamp of AUTO button will on.
LED lamp of AUTO button will on.
●
The sequential switcher built in the monitor allows each camera to show the pictures
sequentially.
sequentially.
●
If a camera is disconnected from the monitor, it will be skipped and the deep sounds.
●
If camera 2 and camera 4 are connected to monitor, this is switched on sequence of camera
2, camera 4.
2, camera 4.
●
If all cameras were disconnected to monitor in AUTO mode, monitor displays channel 1.
●
The switching time can be adjusted from 1 to10 seconds by using time button.
●
Initial dwell time is 2 seconds.
●
If you want manually select camera, please press camera select button.
#
ALARM FUNCTION
●
When the alarm is triggered, its signal goes to the monitor and the monitor shows the
triggered camera picture on the screen.
triggered camera picture on the screen.
●
When two or more cameras are triggered at the same time, the monitor shows finally
triggered camera picture.
triggered camera picture.
●
To reset alarm in case of alarm triggering, press TALK(A.RESET) key.
●
Once the alarm is released, the monitor goes back to the previous mode automatically.
●
If you make the alarm off in the VCR mode, the system doesn't go back to the VCR mode. It
goes back to more previous state than the VCR mode.
goes back to more previous state than the VCR mode.
●
To disable the alarm completely(the alarm is not detected), set alarm lamp off by using alarm
button.
button.
●
Alarm time is 12 seconds.
$
VCR MODE
●
To see the recorded picture, press the VCR key on the system
%
AUDIO SYSTEM
●
This monitor has two way audio system.
●
When a camera picture appears on the screen, you can hear the sound from the camera's
microphone though the speaker built in the monitor.
microphone though the speaker built in the monitor.
●
If you want to talk to camera 2, please select it and go on pressing TALK button and talk.