Sony HSR-X200P Benutzerhandbuch
48
(GB)
Preparations
On-Screen Data Selection
You may independently turn on/off the on-screen data
superimposed on the images on the monitor screen.
Use DISPLAY/VIDEO LOSS SET of MAIN
MENU 2.
superimposed on the images on the monitor screen.
Use DISPLAY/VIDEO LOSS SET of MAIN
MENU 2.
For details on the on-screen data items, see “On-Screen
Data” on page 16(GB).
Data” on page 16(GB).
1
Press the MENU button to display MAIN MENU 1
and press the MENU button again to switch to
MAIN MENU 2.
and press the MENU button again to switch to
MAIN MENU 2.
2
Select 1. DISPLAY/VIDEO LOSS SET.
The DISPLAY/VIDEO LOSS SET display
appears.
appears.
<DISPLAY SET>
DATE : ON
TIME : ON
QUALITY : ON
REC CYCLE : ON
ALARM COUNT : ON
ALARM TYPE : ON
<VIDEO LOSS SET>
VIDEO LOSS : ON
3
Highlight the item to be set and turn Shuttle dial
clockwise.
clockwise.
The current setting flashes.
4
Turn the Jog dial to change the ON/OFF setting
and turn the Shuttle dial clockwise to register your
setting.
and turn the Shuttle dial clockwise to register your
setting.
Repeat steps
3
and
4
for each item to be set.
By setting VIDEO LOSS to ON, a warning
message will be displayed on the monitor screen if
no video input signal is supplied to the unit.
message will be displayed on the monitor screen if
no video input signal is supplied to the unit.
5
When the settings are completed, press the EXIT/
OSD button to exit the menu.
OSD button to exit the menu.
Buzzer Settings
You may independently turn on/off the buzzers for
warning.
Use BUZZER SET of MAIN MENU 2.
warning.
Use BUZZER SET of MAIN MENU 2.
1
Press the MENU button to display MAIN MENU 1
and press the MENU button again to switch to
MAIN MENU 2.
and press the MENU button again to switch to
MAIN MENU 2.
2
Select 3. BUZZER SET.
The BUZZER SET display appears.
<BUZZER SET>
ALARM : ON
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
ALARM: Buzzer that sounds when an alarm is
generated
DISK FULL: Buzzer that sounds when the
remaining of the normal recording or alarm
recording area drops below the specified value.
recording area drops below the specified value.
DISK ERROR: Buzzer that sounds when an error
is generated for the hard disk
LOCK WARNING: Buzzer that sounds when an
operation key is pressed with the security lock
active.
active.
KEY IN: Buzzer that sounds when an operation
key is pressed
NON REC: Buzzer that sounds when recording is
interrupted
3
Highlight the buzzer to be set and turn Shuttle dial
clockwise.
clockwise.
The current setting flashes.
4
Turn the Jog dial to change the ON/OFF setting
and turn the Shuttle dial clockwise to register your
setting.
and turn the Shuttle dial clockwise to register your
setting.
Repeat steps
3
and
4
for each buzzer to be set.
5
When the settings are completed, press the EXIT/
OSD button to exit the menu.
OSD button to exit the menu.