Patton electronic 1001MC Benutzerhandbuch

Model 2707RC Configuration—Configuration page MIB variables description

Model 1001MC Operations Guide 

Loop Time Out (loopTo)
This displays the amount of time that the unit responding to a Remote Loop command will remain in test 
mode when the RL test mode is invoked. If the unit is not taken out of test mode by the menu within this time 
period, the unit will automatically time out and return to normal data mode. The timeout does not apply for 
loops selected via the front panel switches. 

TM from DTE (testModeDTE)
This displays if the 2707RC responds to the LL and RDL signals coming from the DTE.

Configuration Type (configType)
This displays if the 2707RC is using the DIP switch control or software control for its configuration.

Software Version (softVersion2707RC)
This displays the software version of code in the 2707RC. 

The 

Model 2707RC Configuration—Configuration

 page enables you to update the configuration of the 

2707RC NetLink-E1 NTU modems that are installed in the system. After making changes to the configuration 
on this page, select Back to return to the 

Model 2707RC Configuration Slot

 page, then select onLine as the 

Input Mode, and finally, select 

 to send the new information to the Model 1001MC over the net-

work. 

If the NetLink-E1 NTU modems are not connected, and changes 
made to the remote configuration will be lost after the units link-up. 
All parameters in the Local column can be changed at any time. 

The following sections describes the MIB variables that are available on the 

Model 2707RC Configuration—

Configuration

 page. 

This variable displays the status of the line. There are three possible values that can be displayed: 

•

lineDown(1)

•

dataMode(2)—When the line status is dataMode(2), the units are linked-up and ready to send data

•

testMode(3) 

This read-only MIB variable displays the current version of code that is running in the NetLink-E1 rack 
card modem. 

This displays if the 2707RC is using the DIP switch control or software control for its configuration.