Patton electronic 1001MC Benutzerhandbuch

Saving HTTP/HTML object changes

Model 1001MC Operations Guide 

In this document, we shall describe the variables found on each of the internal HTTP/HTML pages. This 
description will include brief definitions of the Patton Enterprise MIB or SNMP MIB II object identifiers 
wherever applicable. The format of the variables will resemble 

Figure 17. HTTP/HTML and SNMP object format

Sometimes you will need to save changes that you have made in the HTTP/HTML pages. Do the following to 
make changes to read/write variables:

1. Select the appropriate 

Modify

 screen.

2. Make changes to the desired parameter.

3. Click on the 

 button.

4. Return to the 

HOME

 screen.

5. Click on the 

 button.

Make sure you follow steps 1 through 5 when modifying the 
HTTP/HTML pages. Otherwise, your changes will be lost when the 
1001MC is power-cycled.

The Model 1001MC web pages have built-in help screens that enable you to get information about the vari-
ables that are being described. Each web page contains several headings that describe the section that is being 
defined. Some of the headings are hyperlinks to the help screen for that page. The new window will automati-
cally scroll to the help area that was requested. You may also scroll through this page to view help information 
about other sections of the page. In some cases, the headings for the tables will be shown as hyperlinks, these 
hyperlinks, work the same as was previously discussed, showing the help screen for that column of the table.

This section describes how to navigate the internal HTTP/HTML web pages on the Model 1001MC. The 
diagram below shows how all of the web pages are linked together. Following 

, there is a brief descrip-

tion of each page. For more detailed information about each web page, refer to chapter 10,