Smeg AP91VJME Benutzerhandbuch

 

 

 

 

 

 

 

 

  Having opened the oven door, press the knob and turn it clockwise to the grill   position, placing a lit 

match to the burner on the roof of the oven. 
Once the burner is lit, hold the knob down for about 10 seconds. If the burner does not stay lit after 
this time, release the knob and wait for at least one minute before trying again. If the burner 
accidentally goes out, turn the knob to the off position ( ) and wait at least one minute before lighting 
again. 

 

   

 

 

 

 

  Having opened the oven door, press the knob and turn it clockwise to the grill 

 position. 

Once the burner is lit, hold the knob down for about 10 seconds. If the burner has not come on by this 
time, release the knob and wait for at least one minute before trying again. If the burner accidentally 
goes out, turn the knob to the off position ( ) and wait at least one minute before lighting again. 
During a power cut the burner can always be lit with a match. 

 

   
 

 

 

   

 

   

 

 

 

 

  Fit the supporting frame onto the second 

runner up from the bottom so that the seat 
to take the rod projects outside the oven. 
Place the rod as shown in the diagram (1) 
and push the frame into the oven until the 
end of the rod reaches the hole in the 
rotisserie motor. Now push the rotisserie rod 
to the left until it reaches the position shown 
in the diagram (2). To activate this function, 

turn the switch to (

). 

These operations must be carried out 
with the oven switched off and cold. 
When cooking is over, use the tool provided 
to extract the rod from the hole (3) and 
remove the frame (4) to bring the rotisserie 
rod out of the oven cavity. 

 

 

 

1

 2 

 

 

3

 4

 

 

 

 

 

 

 

 

  Place the rotisserie frame “B” on the second 

runners up from the bottom and insert the rod 
“A” in the hole in the back of the oven.