Smeg A2-6 Benutzerhandbuch

Seite von 32
 
Instructions for the user 
 
 
 
When the end of the cooking time is reached, the timer will switch off the 
oven heating elements, the beeps will start and the numbers on the dial 
will flash. 
The cooking time can also be reset by deleting the program set; 
pressing the central key 
  for 1 or 2 seconds will delete the time set 
and the oven will have to be switched off by hand. 
Caution: cooking times of more than 6 hours cannot be set. 
Cooking start:
 as well as setting a cooking duration time, the user can also 
set the cooking start time (up to 12 hours after the current time). To set the 
cooking start/end time, proceed as follows. 
Set the cooking duration time as described in the previous point. 
Within 6/7 seconds after the last time the 
 or 
 keys are pressed, 
press the   key to set the cooking start time. The display will show the 
current time with the inside segments indicating the cooking end time 
illuminated. Use the 
 and 
 keys to set the cooking start time. 
6/7 seconds after the last time a key is pressed, the display will show 
the current time and the cooking start and end times, indicated by the 
illuminated inside segments.  The segments on the display will be 
constantly on until the current time is the same as the cooking start time; 
as soon as the current time reaches the cooking start time set, all the 
inside segments will start to flash, indicating that the oven has started 
cooking. 
When the end of the cooking time is reached, the timer will switch off the 
oven heating elements, the beeps will start and the numbers on the dial 
will flash. 
To reset the entire program set, keep the central key 
 pressed for 1 
or 2 seconds: if cooking has already started the oven will have to be 
switched off by hand. 
The image on the right shows an example of 
programming: the current time is 7.06 and 
cooking is programmed to start at 8 o'clock and 
finish at 9. 
At 8 o'clock, the inside segments between 8 and 
9 will start to flash and the hour pointer will 
remain still. 
 
Caution: for the oven to start cooking after the programming procedure 
just described, the thermostat and function selector must be properly 
set on the temperature and function required. 
5.2.4
  "DEMO" Function 
Models with analogue/digital programmer feature a "DEMO" function which 
deactivates the heating elements while leaving the other functions unchanged. To 
activate it, simply press the 
, and 
 keys and keep them held down for 3-4 
seconds. A confirmation buzzer will inform the user that the function is active. When 
the “DEMO” function is active, the number 6 on the clock flashes at regular intervals. 
To deactivate it, simply repeat the same procedure. 
51