Samsung RS26WUNS Benutzerhandbuch

27

If the freezer door is lower than the
refrigerator door.

If the freezer door is higher than the
refrigerator door.

3) After adjusting the doors, turn the nut (

①) clockwise(            ) until the lower end of the bolt,  then tighten the

bolt again with the wrench (

➂) to fix the nut(①).

If you do not fix the nut (

①)firmly, the bolt (➁) may be released. 

2)  Please adjust the height difference between the doors turning the bolt (

➁) clockwise(          ) or counter

clockwise (          ).

When you turn clockwise (

),  the door goes up.

Adjustment location

Adjustment location

➂ WRENCH

➀ NUT

➁ BOLT

➀ NUT

➁ BOLT

➂ WRENCH

➂ WRENCH

➁ BOLT

Please open the doors and adjust the doors as follows:

1) Release the nut (

①) on the lower hinge  until the upper end of the bolt (➁).

When you release the nut(

①), use enclosed hex wrench (➂) to turn the bolt(➁) a little 

counter clockwise.  Loosen the nut(

①) with your finger.

➀ NUT

DA99-00810A-0.6(EN)  3/14/07 11:52 AM  Page 27