Clarion SIRCR Benutzerhandbuch

12

When connected to the Plug and Play 
receiver’s cradle, the antenna can receive the 
SIRIUS signal virtually anywhere as long as no 
obvious obstructions, such as buildings, high 
terrain, parking garages and tunnels block the 
satellite signal.

2.

Mount the antenna on the roof or trunk.

If the vehicle has a roof or trunk rack, you may 
have to mount the antenna off-center. The 
magnet secures the antenna in place.

3.

Connect the power adapter to the cradle and 
the vehicle’s +12 VDC power receptacle 
(cigarette lighter).

4.

Press the power button to turn the Plug and 
Play receiver’s power on.

5.

If you don’t hear anything, check the signal 
strength indicator in the bottom left corner of the 
display.

If necessary, move the antenna to different 
positions until the signal comes loud and clear.

6.

Mark this position with masking tape or use 
some other method that won’t scratch the body 
work.

1.

Plan the routing of the antenna cable to the 
Plug and Play receiver’s antenna input.

Avoid any obstructions that could crimp, kink or 
twist the cable. Use protective grommets 
wherever you encounter rough openings.

2.

At the lowest point of the rear window, route the 
cable into the trunk, taking advantage of 
existing cable conduits.

3.

Snake the cable around the passenger 
compartment to the back of the SIRIUS cradle.

Sirius_Shuttle_Vehicle_Installation.book  Page 12  Friday, March 12, 2004  4:56 PM