Clarion SIRCR Benutzerhandbuch
SIRCR
5
•
To prevent a short-circuit, turn off the ignition
and remove the negative (-) battery cable
before starting to install. Connect the power
wires last.
and remove the negative (-) battery cable
before starting to install. Connect the power
wires last.
•
Do not install the receiver where it will receive
direct sunlight or be subject to extreme
temperatures.
direct sunlight or be subject to extreme
temperatures.
•
Mount the receiver firmly in place using the
hardware supplied. Incorrect installation may
cause damage to the system.
hardware supplied. Incorrect installation may
cause damage to the system.
2. Installation cautions
•
Do not damage the vehicle wiring.
•
Use the supplied screws and washers.
•
Do not snag any wires when tightening the
screws.
screws.
In addition to the components in the kit, you will
need a dry, clean, lint-free cloth. If it’s cold outside
you may also need a hair dryer to warm the
adhesive backing on the mounting base.
need a dry, clean, lint-free cloth. If it’s cold outside
you may also need a hair dryer to warm the
adhesive backing on the mounting base.
Sirius_Shuttle_Vehicle_Installation.book Page 5 Friday, March 12, 2004 4:56 PM