Beko TL 546 APW Benutzerhandbuch

EN

15

Final Check
Before you start using the refrigerator 
check that:
1.The  front feet have been adjusted 
so the appliance is level.
2.The interior is dry and air can 
circulate freely.
3.Clean the interior as recommended 
under “CLEANING AND CARE.”
4.Insert the plug into the wall socket 
and switch on the electricity supply.
When the door is open the interior light 
will come on.
5.You will hear a noise as the 
compressor starts up. The liquid and 
gases sealed within the refrigeration 
system may also give rise to noise, 
whether the compressor is running or 
not which is quite normal.
6. We recommend that you set the 
thermostat knob at 3 (three) and 
monitor the temperature to ensure the 
appliance 
maintains desired storage 
temperatures (See section 
Temperature Control and Adjustment).
7.

 Do not load the appliance 

immediately it is switched on. Wait until 
the correct storage temperature has 
been reached. 
We recommend that you check 
the temperature with an accurate 
thermometer 
(see; Temperature Control and 
Adjustment).

Important Note :
Ice formation at the back is normal, do 
not worry. (See Defrosting) fan guard 
as they may cause the cooling system 
to block and therefore operate less 
efficiently.