Smeg ALFA201XE Benutzerhandbuch

 

 

 

N.B. - during preheating and cooking, whenever the door is opened the 
message "door" will appear on the display and a beep will sound to warn 
the user that the door must be closed while these operations are in 
progress. 

 

To modify one of the programs, turn the knob to one of the programs from 
P1 to P14 edited previously. 
The parameters saved earlier will appear on the display. 
Hold down STOP for 2 seconds. 
The display shows U t°C. 
Press START to display the cooking temperature. 
Press  START or keep it pressed to increase the cooking temperature; 
each time START is pressed the temperature increments by 1°C (from 50° 
to 300°), or hold START down for increments of 5°C. 
Press STOP to move on to displaying the next parameter 
The display shows U Ct. 
Press START to display the cooking time. 
Press START or keep it pressed to increase the cooking time (from 1 min. 
to 99 min.). 
Press STOP to move on to displaying the next parameter 
The display shows U Ht only if Ut°C is set > 150°C 
Press START to display the humidification cycles. 
Press START or keep it pressed to increase the number of humidification 
cycles (from 0 to 6 cycles where 0 means conventional fan-mode cooking 
without the aid of humidification). 
Press STOP to complete the program editing procedure. 
The display shows UEnd. 
The parameters set are now saved in the chosen program.