Beko TFF546APS Benutzerhandbuch
EN
10
16
.
Re-fit the upper hinge on the
opposite side by using a flat headed
screwdriver. (15)
17. Fit front top panel plastic hinge
covers on the opposite sides. (16)
covers on the opposite sides. (16)
18. Remove the handle cover gently
taking care not to damage the
appliance.(17)
19. Rotate 180 degrees and fit handle
to the other side after removing hole
plugs gently.(19)
20. Adjust the two front feet if
necessary.
necessary.
Check that door opens and closes .21
easily, it is aligned correctly and there
are no gaps allowing air into the
cabinet. If here are gaps between the
door seal and the cabinet, adjust the
door seal by gently pulling away from
easily, it is aligned correctly and there
are no gaps allowing air into the
cabinet. If here are gaps between the
door seal and the cabinet, adjust the
door seal by gently pulling away from
.the door using fingers
22. Check that all the hinge screws are
tightened. Avoid over tightening the
screws.
23. Put all items, fittings back in the
appliance.
appliance.
24. Wait for at least 4 hours to allow
the system to settle before switching
on.
25. Once the correct storage
temperatures have been reached in
the appliance, put back all the food.