KitchenAid KFP715 Benutzerhandbuch

Seite von 83
10
ENGLISH
Preparing the Food Processor for Use
Citrus Press Assembly and Use
  1. Position and lock the work bowl on 
the base.
  2. Place the strainer basket in the bowl 
and position the locking clip to the 
left of the work bowl handle.
  3. Turn the basket counterclockwise 
until the clip locks into the handle.
  4. The 2-piece cone offers two sizes. Use 
the outer cone for grapefruit, oranges 
and other large fruits. Remove the outer 
cone to reveal a smaller, inner cone 
that’s perfect for lemons and limes.
  5. Open the lid and place the cone inside 
the strainer basket, over the power 
shaft. It may be necessary to rotate the 
cone until it falls into place.
  6. Halve the fruit to be juiced.
  7. Place fruit half on the cone.
  8. Close the lid of the strainer basket. 
Hold the lever arm down firmly with 
an open palm to maintain even 
pressure. Operate the citrus press 
only when the lever arm is in the 
down position, holding the fruit on 
the cone.
NOTE: To avoid splatters, use the citrus 
press with the clip-on lever arm.
  9. Operate the citrus press by pressing 
the ON button or the Pulse button.
 10. When juice is fully extracted, press 
the OFF button.
NOTE: Do not exceed the maximum 
liquid level line on the work bowl, or juice 
will leak from the bowl. 
 11. Unplug Food Processor
 12. Unlock the strainer basket by turning 
it clockwise. Remove juiced fruit, 
cone, and strainer basket from the 
work bowl.
 13. Remove the work bowl from Food 
Processor and pour juice into desired 
container.
 14. To detach the clip-on lever arm from 
the strainer basket for cleaning, pull 
the clip at the bottom of the basket 
away from the basket side and remove 
the lever arm from the basket.
 15. When reattaching the lever arm to the 
strainer basket, make sure the tabs 
on the clip snap securely into a pair 
of holes in the bottom of the basket.