Sony MZ-R909 Benutzerhandbuch
31
It is convenient for managing multiple
CD albums recorded in MDLP (LP2
stereo/LP4 stereo) mode onto a single
MD.
CD albums recorded in MDLP (LP2
stereo/LP4 stereo) mode onto a single
MD.
How is group information
recorded?
recorded?
When recording in group mode, the group
information is written to the disc name
recording area.
This information consists of text strings
that are written as shown in the following
example.
information is written to the disc name
recording area.
This information consists of text strings
that are written as shown in the following
example.
Disc name recording area
Therefore, the above character string is
displayed in its entirety as the disc name
if you load an MD recorded in group
mode into a system that does not support
group mode, or if you try to edit the
contents of a disc on this recorder with the
group mode turned off.
displayed in its entirety as the disc name
if you load an MD recorded in group
mode into a system that does not support
group mode, or if you try to edit the
contents of a disc on this recorder with the
group mode turned off.
Note that if you perform the
procedure for “Relabeling
recordings” of “Labeling
recordings” (page 59) and rewrite
this character string by mistake,
you may be unable to use the
group function of that MD.
procedure for “Relabeling
recordings” of “Labeling
recordings” (page 59) and rewrite
this character string by mistake,
you may be unable to use the
group function of that MD.
Notes
• The group function setting is stored even if
you eject the MD or turn off the recorder.
• In group mode, the recorder treats all tracks
without group settings as belonging to the last
group on the disc. The last group is indicated
in the display window on the recorder as
“Group --”. Within a group, the tracks appear
in their order on the disc, not their order
within the group.
group on the disc. The last group is indicated
in the display window on the recorder as
“Group --”. Within a group, the tracks appear
in their order on the disc, not their order
within the group.
To activate the group mode
To record tracks in group mode, you must
first turn the group mode on before the
start of recording.
first turn the group mode on before the
start of recording.
On the recorder
1
Press GROUP for 2 seconds or more.
“
“
” lights up and the group mode
turns on.
To cancel the group mode, press
GROUP for 2 seconds or more again.
To cancel the group mode, press
GROUP for 2 seconds or more again.
On the remote control
1
Press DISPLAY for 2 seconds or
more, turn the control towards .
or N> until “GROUP” flashes in
the display, and then press x.
more, turn the control towards .
or N> until “GROUP” flashes in
the display, and then press x.
2
Turn the control towards . or
N> until “GROUP ON” flashes
in the display, and then press x.
“G” lights up in the display.
To cancel the group mode, select
“GROUP OFF” in step 2.
N> until “GROUP ON” flashes
in the display, and then press x.
“G” lights up in the display.
To cancel the group mode, select
“GROUP OFF” in step 2.
Recording a track into a new
group
group
1
While the recorder is stopped, press
GROUP for 2 seconds or more.
GROUP for 2 seconds or more.
2
Press END SEARCH.
3
Press and slide REC to the right.
4
Play the source sound.
To stop recording, press x.
The material that was recorded up until x
was pressed is entered as a new group.
was pressed is entered as a new group.
1
2
3
1
Disc name: “Favorites.”
2
Group name for tracks 1 to 5: “Rock”.
3
Group name for tracks 6 to 9: “Pops”.
Example