Samsung HT-TX55 Benutzerhandbuch
ENG
SETUP
51
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1
In Stop mode, press the
MENU
button.
2
Press the Cursor
button to move to
<Audio>
and then press the
ENTER
button.
3
Press the Cursor
button to move to
<HDMI AUDIO>
and then press
the
ENTER
button.
4
Press the Cursor
,
button to select <ON> or <OFF> and then press
the
ENTER
button.
•
ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
•
OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
the home theater speakers only.
Press the
RETURN
button to return to the previous level.
Press the
EXIT
button to exit the setup screen.
Setting the HDMI Audio
MOVE
ENTER
EXIT
RETURN
MOVE
SELECT
EXIT
RETURN
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
50
Settings
(Con’t)
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.
the video.
1
In Stop mode, press the
MENU
button.
2
Press the Cursor
button to move to
<Audio>
and then press the
ENTER
button.
3
Press the Cursor
button to move to
<AV-SYNC>
and then press
the
ENTER
button.
4
Press the Cursor
,
button to select the AV-SYNC Delay Time and then
press the
ENTER
button.
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
Press the
RETURN
button to return to the previous level.
Press the
EXIT
button to exit the setup screen.
Setting the AV SYNC
This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital
sound when watching movies at low volume at night.
sound when watching movies at low volume at night.
1
In Stop mode, press the
MENU
button.
2
Press the Cursor
button to move to
<Audio>
and then press the
ENTER
button.
3
Press the Cursor
button to move to
<DRC>
and then press the
ENTER
button.
4
Press the Cursor
,
button to adjust the DRC.
When the Cursor
button is pressed, the effect is greater, and when the Cursor
button is
pressed, the effect is smaller.
Press the
RETURN
button to return to the previous level.
Press the
EXIT
button to exit the setup screen.
Setting the DRC (Dynamic Range Compression)
CHANGE
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN
MOVE
SELECT
EXIT
RETURN
MOVE
ENTER
EXIT
RETURN