Sony Viao PictureBook Computer Handbuch
Connecting to a Local Area Network
41
Connecting to a Local Area Network
You can connect your computer to 10BASE-T and 100BASE-TX-type Local
Area Networks (LANs) by using the supplied port replicator and its Ethernet
port. For the detailed settings and devices needed to connect to the network, ask
your network administrator.
Area Networks (LANs) by using the supplied port replicator and its Ethernet
port. For the detailed settings and devices needed to connect to the network, ask
your network administrator.
To set up your ethernet connection
To connect to a network:
Connecting to LAN
Warning: Only connect 10BASE-T and 100BASE-TX cables to the
Ethernet
port. Do not connect any other type of network cable or any telephone line.
Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
port. To connect the unit to the network, contact your network administrator.
Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
port. To connect the unit to the network, contact your network administrator.
If you enable Wake on LAN, the power saving mode will be switched to
Standby mode.
Standby mode.
Ethernet
port