Sony UP-GR700 Benutzerhandbuch

Mi
sc
el

lane

ou
s

Specifications / List of Messages

22

Power requirements

100 to 240 V AC, 50/60 Hz

Input current

3 A to 1.3 A max. (while printing)

Operating temperature range

5°C to 35°C (35°F to 95°F)

Operating humidity range

20 % to 80 %

External dimensions

Approx. 370 × 350 × 400 mm (WHD)

(14 5/8 × 13 7/8 × 15 3/4 inches)
(including the maximum projecting 
parts)

Mass

Approx. 30 kg (66 lb 2 oz) (printer 

only)

Printing system Dye sublimation thermal transfer
Thermal head

11.8 dot/mm, 2560 elements (300 dpi)

Gradations

8 bits each for yellow, magenta and 

cyan

Picture size

203 × 254 mm (8 × 10 inches)
203 × 305 mm (8 × 12 inches)

Printable pixels 2444 × 3044 dots (for printouts of 203 

× 254 mm size (8 × 10 inch size))

2444 × 3644 dots (for printouts of 203 

× 305 mm size (8 × 12 inch size))

Printing time

Glossy laminating type:
203 × 254 mm size (8 × 10 inch size); 

Approx. 43 sec.

203 × 305 mm size (8 × 12 inch size); 

Approx. 48 sec.

Matt laminating type:
203 × 254 mm size (8 × 10 inch size); 

Approx. 53 sec.

203 × 305 mm size (8 × 12 inch size); 

Approx. 58 sec.

Input connector AC IN (for power)
Interface

Hi-Speed USB (USB2.0)

Accessories supplied

Feet (2)
CD-ROM (1)
Software License Agreement (1)
Before Using this Printer (1)
Warranty Card (1)

Self-Laminating Color Printing Pack

2UPC-R710 series

Air Filter

Design and specifications are subject to change without 
notice.

Error numbers and error messages appear on the monitor 
of the computer connected to the printer. Please take the 
remedial actions shown next to the message to correct 
the problem.

When the following error numbers and error messages 
appear on the monitor, you should turn the printer off. 
Please take the remedial actions shown next to the 
message to correct the problem. Then turn the printer on 
again. If the error message and the error number are still 
displayed, and the problem has not been solved, contact 
your nearest dealer.

 

E00

USB Communication Error.
Please Check USB Communication.

E01

Print head does not work. (up).
Please re-start the printer.

E02

Print head does not work. (down).
Please re-start the printer.

E03

Please check the position of the ink 
ribbon and re-start the printer.

E04

Error in head controller.
Please re-start the printer.

E05

Paper jam during feeding
Please re-start the printer.

E06

Paper jam during rewinding.
Please re-start the printer.

E07

Paper cutter is not working.
Please re-start the printer.

E08

Internal command error.
Please re-start the printer.

E09

Error in writing flash ROM.
Please re-start the printer.

E10

Failure in power supply.
Please re-start the printer.

E11

Failure in grip roller movement.
Please re-start the printer.

E12

Please check the room-temperature 
thermostat.
Please re-start the printer.

E13

Please check the room-temperature 
thermostat.
Please re-start the printer.

E14

Please check the print-head thermostat.
Please re-start the printer.

E15

Please check the print-head thermostat.
Please re-start the printer