Samsung ML-2015/XEV Benutzerhandbuch

Samsung Electronics

Service Manual

Disassembly and Reassembly

5-10

6. Remove the thermo cap by releasing 2 screws as

shown as below.

(Screw x 2:Black_M3,6003-000282)

7. After pulling out the thermostat as shown as below,

remove the CBF harness from its left/right side.

8. Release the screw as shown as below, remove the

harness from the cover, and then pull out the thermistor.

(Screw x 1:Black_M3,6003-000196)

9. After separating the CBF harness connected to the

left/right side of the halogen lamp, release 2 screws
from the halogen lamp.

(Screw x 2:Black_M3,6003-000196)

10. Separate the Cover-M by releasing 2 screws as

shown as below.

(Screw x 2 : Black_M3, 6003-000196)

11. Remove the halogen lamp from the heat roller by

pulling it out to the arrow direction.

Note : Under the condition that the fuser is connected to the frame,the exit roller F/Down can be

separated.However,be careful that the Roller_Main,the Roller_FR,and F/Down Holder could get into the
inner frame due to the spring’ action.

Thermo Cap

Thermostat

Thermistor

Cover-M

Halogen Lamp

Heat Roller