Adaptec 1450 Benutzerhandbuch
2
SlimSCSI 1450 Adapter User’s Guide
Installing the SlimSCSI 1450
Follow these steps to install the SlimSCSI 1450 and connect your
SCSI devices to it:
SCSI devices to it:
1
Remove the SlimSCSI 1450 from its packaging.
2
Plug the 50-pin connector into the first (or only) SCSI device, as
shown below. Make sure the SCSI device is not powered.
shown below. Make sure the SCSI device is not powered.
If the SCSI device has a DB25 (25-pin) connector, attach the
50-pin-to-DB25 converter, as shown below, and plug it into the
connector on the device.
50-pin-to-DB25 converter, as shown below, and plug it into the
connector on the device.
SCSI Connector
SCSI Device
Terminator
50-pin-to-25-pin
Converter