Sony 300PK Benutzerhandbuch
Chapter 2 Fitting and Connections
32
Chapter 2
Fitting and Connections
Fitting the Lens
Retaining rubber
Lens mount cap
Lens fixing lever
Align and push in.
In the case of the DSR-300K/300PK/300F/300PF
model, the lens is already fitted. In other cases, use the
following procedure to fit the lens.
model, the lens is already fitted. In other cases, use the
following procedure to fit the lens.
Note
Be sure to turn off the power before fitting the lens.
1
Remove the retaining rubber
which prevents the lens mount
from coming loose, then raise
the lens fixing lever, and
remove the lens mount cap.
from coming loose, then raise
the lens fixing lever, and
remove the lens mount cap.
2
With the lens fixing lever
turned fully counterclockwise,
push in the lens, aligning the
projection on the lens with the
cutout on the camcorder.
push in the lens, aligning the
projection on the lens with the
cutout on the camcorder.
3
Supporting the lens, turn the
lens fixing lever fully
clockwise. Replace the
retaining rubber on the lens
mount.
lens fixing lever fully
clockwise. Replace the
retaining rubber on the lens
mount.