Roberts Radio STREAMTime Benutzerhandbuch

Seite von 68
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Line out socket (3.5mm Jack)
A 3.5mm Line Out socket located on the rear of your clock radio is provided 
for connecting the audio signal to an external amplifi er.  Inserting an audio 
cable into this socket will not mute the internal loudspeaker. Set the volume 
control on the clock radio to minimum if desired.
52
Display and Audio           
2,3
2,3
1-3
Headphone socket
1. A 
3.5mm Headphone Socket located on the rear of your clock radio 
is provided for use with headphones. Inserting a plug automatically 
mutes the internal loudspeaker.
IMPORTANT: Excessive sound pressure from earphones and headphones 
can cause hearing loss.
Your clock radio is supplied set up for best audio quality from the built 
in loudspeaker. If you wish to use headphones you may set the audio 
settings so as to give best quality when listening via headphones.
1.  When the radio is playing press and hold the Select/Tone button 'Off' 
will show on the display. The clock radio will select the Audio menu 
which allows bass and treble adjustment as well as alternative access 
to the main Mode menu.
2.  To adjust the headphone audio setting, press the Tuning Up or Down 
buttons until 'Headphone EQ' is displayed. Press and release the Select 
button. The display will show the current Headphone EQ setting.
3. Press 
the 
Tuning Up or Down buttons to set the headphone EQ to 
On or to Off. Press the Select button to confi rm selection.