Roberts Radio STREAMTime Benutzerhandbuch

56

If you need to enter the wifi  network name manually into your radio (if the 
SSID is not being broadcast by your router) then please use the following 
procedure.

1.  From the radios Settings menu, select ' Network' and then 'Enter 

network name'.

2.  To enter the SSID, characters are selected and entered using the 

Tuning Up or Down buttons. As you press the buttons, the radio 
scrolls through the available characters.  The central character will 
be entered when you press the Select button. 

 

Do this as needed until the complete network name has been entered. 
The SSID setting is sensitive to upper and lower case characters and 
symbols. You must enter it exactly as set up in your router.

  

 

Press the 'Back' button to erase a character or key previously 
entered

 Select 

'END' when the SSID is complete 

 

Alternatively the 'END' symbol can be quickly accessed by pressing 
the Add/RDS button.

 Select 

'Back' button to cancel and go back to the DNS settings 

screen

3.  The clock radio will then try to connect to the named network. The 

remainder of the connection procedure should then be followed - see 
page 10, step 11.

 

 

2

2

2

2