Sony RDR-GX7 Benutzerhandbuch
79
Features Settings
Sett
ings
a
nd Adjustment
s
MPEG (DVD VIDEO only)
Selects the type of MPEG audio signal.
DTS (DVD VIDEO only)
Selects whether or not to output DTS signals.
Note
When you use the DIGITAL OUT (OPTICAL or COAXIAL) jack to
listen to MPEG audio signals and set “MPEG” to “MPEG” in Audio
Setup, no sound will come from your speakers if you select one of the
TVS modes.
listen to MPEG audio signals and set “MPEG” to “MPEG” in Audio
Setup, no sound will come from your speakers if you select one of the
TVS modes.
Features Settings
The Features Setup provides entries to the following features.
TV Direct Rec (DVD-RW/DVD+RW/DVD-R only)
Auto Chapter (DVD-RW in Video mode/
DVD+RW/DVD-R only)
DVD+RW/DVD-R only)
Automatically divides a recording (a title) into chapters by
inserting chapter markings at a specified interval. The markings
are made during recording.
inserting chapter markings at a specified interval. The markings
are made during recording.
TV Guide Page
Some broadcast systems ensure a Teletext service* in which the
complete programmes and their data (title, date, channel,
recording start time, etc.) are stored day by day. A TV guide
page corresponds to each day of the week. When recording a
programme, the recorder automatically takes the programme
name from the Teletext pages and stores it as the title name. The
TV guide page numbers depend entirely on the broadcast itself
and may be subject to change. If so, you may have to set those
TV guide page numbers manually in the TV Guide Page menu.
complete programmes and their data (title, date, channel,
recording start time, etc.) are stored day by day. A TV guide
page corresponds to each day of the week. When recording a
programme, the recorder automatically takes the programme
name from the Teletext pages and stores it as the title name. The
TV guide page numbers depend entirely on the broadcast itself
and may be subject to change. If so, you may have to set those
TV guide page numbers manually in the TV Guide Page menu.
* Not available in some areas.
1
Follow steps 1 to 3 of “Using the Setup Displays”
(page 74) to select “Features” in the Setup
Display.
(page 74) to select “Features” in the Setup
Display.
2
Press
M/m to select “TV Guide Page” then press
, or ENTER.
The dialogue box appears.
The dialogue box appears.
3
Select the programme position for which you
want to set or change the TV guide page.
want to set or change the TV guide page.
• The TV guide page numbers appear automatically when
the recorder detects them example: (P301).
PCM
Select this when the recorder is connected to an
audio component without a built-in MPEG
decoder. If you play MPEG audio sound tracks,
the recorder outputs stereo signals via the
DIGITAL OUT (OPTICAL or COAXIAL)
jack.
audio component without a built-in MPEG
decoder. If you play MPEG audio sound tracks,
the recorder outputs stereo signals via the
DIGITAL OUT (OPTICAL or COAXIAL)
jack.
MPEG
Select this when the recorder is connected to an
audio component with a built-in MPEG
decoder.
audio component with a built-in MPEG
decoder.
On
Select this when the recorder is connected to an
audio component with a built-in DTS decoder.
audio component with a built-in DTS decoder.
Off
Select this when the recorder is connected to an
audio component without a built-in DTS
decoder.
audio component without a built-in DTS
decoder.
On
Allows you to easily record what you are
watching on the TV using SMARTLINK.
watching on the TV using SMARTLINK.
Off
Turns off the TV Direct Rec function.
Off
No chapter mark is inserted.
6Min
Inserts chapter marks at approximately 6
minute intervals.
minute intervals.
15Min
Inserts chapter marks at approximately 15
minute intervals.
minute intervals.
Features-TV Guide Page
Prog. 4
Sun
Mon
Tue
Wed
Thu
Fri
Sat
P 301
P 302
P 303
P 304
P 305
P 306
P 307
,
continued