Stamina Products 15-0135 Benutzerhandbuch

1.  To store the 

inStride® Total Body Cycle, simply keep it in a clean dry place.

2.  To move the 

inStride® Total Body Cycle, Grasp the handle which is built into the LEFT and RIGHT 

COVERS(35, 36). Do not use the PEDALS(37, 38) to move the inStride® Total Body Cycle. The 

PEDALS(37, 38) will move and the CRANK(5) may pinch your hand or fingers.

3.  To  avoid  damage  to  the  electronics,  remove  the  battery  from  the 

METER(13) before storing the 

inStride® Total Body Cycle for one year or more.

The safety and integrity designed into the 

inStride® Total Body Cycle can only be maintained when the 

inStride® Total Body Cycle is regularly examined for damage and wear. Special attention should be 

given to the following:

1.  Adjust the 

TENSION KNOB(10) and verify that the Flywheel System provides tension. The Flywheel 

System should provide many years of use.

2.  Use  a  wrench  to  verify  that  the 

PEDALS(37, 38) are tightened securely. If tightening is required, 

remember that the left pedal has left hand threads and is tightened by turning counterclockwise.

3.  Verify  that  all  nuts  and  bolts  are  present  and  properly  tightened.  Replace  missing  nuts  and  bolts. 

Tighten loose nuts and bolts.

4.  Verify that the 

CAUTION LABEL(44) is in place and easy to read. Call Stamina Products immediately 

at 

1-800-375-7520 for a replacement CAUTION LABEL(44) if it is missing or damaged.

5.  It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

6.  Worn  or  damaged  components  shall  be  replaced  immediately  or  the 

inStride® Total Body Cycle 

removed from service until repair is made.

7.  Only  Stamina  Products  supplied  components  shall  be  used  to  maintain/repair  the 

8.  Keep your 

inStride® Total Body Cycle clean by wiping it off with an absorbent cloth after use.