Sony Telephone with Answering Machine Benutzerhandbuch

S100/150 colour Tchibo / UK / A31008-M1575-L131-1-7619 / appendix.fm / 01.07.2005

Wipe the base and the handset with a damp cloth (use no solvent) or an antistatic cloth. 

Never use a dry cloth as this can cause static discharge! 

If the handset should come into contact with liquid, on no account switch the device 

on. Remove all batteries immediately.
Allow the liquid to drip out of the device, and then dab all parts of the device dry.
Keep the handset with the batteries removed in a warm, dry place for at least 72 hours. 

In many cases, you will then be able to use it again.

If any questions occur to you while you are using your device, our customer advisor will 

be more than happy to help you. You will find the most frequently asked questions and 

answers below.

... the display is blank?

Handset is not switched on.

The batteries are flat.

Hold down the end call key 

a

 

for about 2 seconds.

Charge or replace the batteries 

… the handset fails to respond 

to a key press?

The keypad protection is acti-

vated.

Hold down the hash key 

R

 

for about 2 seconds 

... "Base x" flashes in display? The handset is outside the base 

station range.

The base station is not activated.

Move the handset closer to 

base station.

Check the mains connector at 

the base station (page 8).

... Base Search flashes in the 

display?

The handset is set to Best Base, 

but there is no base station acti-

vated or in range.

Move the handset closer to 

base station.

Check the mains connector at 

the base station (page 8).

... an Internet address appears 

in the display? 

The automatic registration of 

your handset has been inter-

rupted.

Register your handset manu-

ally (page 81). 

… (if several handsets are 

used) the handset in the base 

station does not charge?

A handset cannot be charged 

while a telephone call is being 

made.

Use an additional charging 

unit.

... the handset or the base sta-

tion does not ring?

The ringer tone is switched off.

Call diversion has been set to All 

.

Activate the ringer tone of the 

handset (page 95) or the base 

station.

Switch off call diversion 

... I cannot hear any ringer/

dialling tone?

You have changed the telephone 

cord on your telephone.

Ensure, when purchasing a 

new cord, that it has the cor-

rect pin assignment (page 8).

... the units/call charges are 

not displayed?

There are no metering pulses.

 Ask your network provider to 

transmit the metering pulses.