Samsung HT-F6500W Benutzerhandbuch
English
25
|
04
Settings
Wireless Network
You can setup a wireless network connection in three
ways:
ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network connection,
disconnect any wireless network device currently
connected to the product or, if applicable, the product's
current wired connection.
disconnect any wireless network device currently
connected to the product or, if applicable, the product's
current wired connection.
Wireless - Automatic
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 24:
Connection" on page 24:
1.
In the Network Settings screen, change Network
type to Wireless. Then, select Connect and press
the E button.
The product searches for and then displays a list of
the available networks.
type to Wireless. Then, select Connect and press
the E button.
The product searches for and then displays a list of
the available networks.
Network Settings
Select your network type.
Network type
Wireless
Wireless Network
You can connect your TV to the
internet. Please select which
wireless network to use.
internet. Please select which
wireless network to use.
Please select your preference.
si-ap
iptime
iptime5G
KIMING_VTOWER
TIAS
WPS(PBC)
Refresh
2.
Select the desired network, and then press the E
button.
button.
3.
On the Security screen, enter your network's
security code or pass phrase.
Enter numbers directly using the number buttons
on your remote control. Enter letters by selecting a
letter with ▲▼◄► buttons, and then pressing E
button.
security code or pass phrase.
Enter numbers directly using the number buttons
on your remote control. Enter letters by selecting a
letter with ▲▼◄► buttons, and then pressing E
button.
4.
When finished, select Done, and then press the E
button. The product verifies the network connection
and then connects to the network.
button. The product verifies the network connection
and then connects to the network.
| NOTES |
You should be able to find the security code or pass
phrase on one of the set up screens you used to set
up your router or modem.
phrase on one of the set up screens you used to set
up your router or modem.
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the Network
Settings values manually.
procedure does not work, you'll need to set the Network
Settings values manually.
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 24:
Connection" on page 24:
1.
In the Network Settings screen, change Network
type to Wireless. Then, select Connect and press
the E button.
The product searches for and then displays a list of
the available networks.
type to Wireless. Then, select Connect and press
the E button.
The product searches for and then displays a list of
the available networks.
2.
Scroll through the list, select the desired network or
Add Network, and then press the E button.
3.
If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
If you selected Add Network, go to Step 4.
4.
Enter your wireless network or wireless router's
name.
name.
• Enter numbers directly using the number buttons
on your remote control.
• Enter letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
• To display capital letters (or redisplay small letters
if capital letters are displayed), select
, and
then press the E button.
• To display symbols and punctuation, select
123#&, and then press the E button. To
redisplay letters, select 123#&, and then press
the E button.
redisplay letters, select 123#&, and then press
the E button.
When finished, select Done, and then press the E
button.
5.
On the Security type screen that appears, use the
▲▼buttons to select the network's Security type,
and then press the E button. On the next screen,
enter your network's security code or pass phrase.
▲▼buttons to select the network's Security type,
and then press the E button. On the next screen,
enter your network's security code or pass phrase.
• Enter numbers directly using the number buttons
on your remote control.
• Enter letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
When finished, select Done, and then press the E
button. The product searches for the network.
6.
The Network connection fail screen appears. Use
◄► buttons to select IP Settings, and then press
the E button.
◄► buttons to select IP Settings, and then press
the E button.
7.
Select the IP Setting field, and then set it to Enter
manually.
manually.
8.
Select a network value to enter (IP Address, for
example), and then press E button. Use the
number keypad on your remote control to enter the
numbers for the value. You can also enter numbers
using the ▲▼ buttons. Use the ◄► buttons on the
remote control to move from entry field to entry field
within a value. When done with one value, press the
E button.
example), and then press E button. Use the
number keypad on your remote control to enter the
numbers for the value. You can also enter numbers
using the ▲▼ buttons. Use the ◄► buttons on the
remote control to move from entry field to entry field
within a value. When done with one value, press the
E button.
HT-F6500W_ZA_0124.indd 25
HT-F6500W_ZA_0124.indd 25
2013-01-24 오후 4:59:07
2013-01-24 오후 4:59:07