Benutzerhandbuch für Impex NS-1003U

Inhaltsverzeichnis

• BEFORE YOU BEGIN...................................................................................…. 1

  2
• IMPORTANT SAFETY NOTICES..................................................................…. 2

  2
• HARDWARE PACK……….....…....................................................................…. 4

  2
• ASSEMBLY INSTRUCTIONS........................................................................…. 6

  2
• EXPLODED DIAGRAM………………………………………………………………. 11

  2
• PARTS LIST...................................................................................................… 12

  2
• OPERATING NOTES………………………………………………………………… 13

  2
• WARRANTY.................................................................................................…. 17

  2
• ORDERING PARTS.....................................................................................….. 17

  2
  • Carriage Bolt M8 x 2 3/8”

    5
  • Curved Washer Ø 5/8”

    5
  • M8 Acorn Nut

    5
  • Allen Bolt M8 x 5/8“

    5
• A.) Attach the Handle (#5) to the Front Post (#4). Secure it with one Bracket (#30), one M8 x ¾” Allen Bolt (#19), and one T-shaped Lock Knob (#26).

  9
• B.) Connect Upper Computer Wire (#28) from Computer (#6) to the Middle Computer Wire (#21) from Front Post.

  9
• C.) Remove the two M5 x 3/8” Philips Screws (#29) from Computer. Slide the Computer onto the bracket on Front Post. Secure it with the two Screws.

  9
• A.) Remove the three Ø 5/8” Washers (#12), three Ø 5/8” Lock Washers (#13), and three M8 Aircraft Nuts (#14) from the Seat (#8).

  10
• B.) Attach the Seat to the Seat Post (#7). Secure it with three Ø 5/8” Washers (#12), three Ø 5/8” Lock Washers (#13), and three M8 Aircraft Nuts (#14).

  10
• C.) Insert the Seat Post into the opening on Main Frame (#1). Thread the Lock Knob (#11) through the hole on Seat Post to securely lock it at selected height.

  10
• MUSCLE TONING

  17
• WEIGHT LOSS

  17