Benutzerhandbuch für Lucent Technologies R5SI

Benutzerhandbuch (English)

Benutzerhandbuch

Inhaltsverzeichnis

Table of Contents
3
About This Book
16
1. Maintenance Architecture
28
- Maintenance Objects
  28
- Alarm and Error Reporting
  29
- Maintenance Testing
  29
- Protocols
  30
  - Layers
    31
  - Usage
    33
    - Layer-1 Protocols
      33
    - Layer-2 Protocols
      34
  - Protocol States
    35
  - Connectivity Rules
    36
  - Disconnect Supervision
    37
    - Transfer on Ringing
      38
    - Conference, Transfer, and Call-Forwarding Denial
      38
  - Transmission Characteristics
    40
  - Frequency Response
    41
  - Insertion Loss for Port-to-Port; Analog or Digital...
    42
  - Intermodulation Distortion
    42
  - Quantization Distortion Loss
    43
  - Impulse Noise
    43
  - ERL and SFRL Talking State
    44
  - Peak Noise Level
    44
  - Echo Path Delay
    44
- Service Codes
  44
- Facility Interface Codes
  45
- Multimedia Interface (MMI)
  46
2. Circuit Packs and Power
48
- Circuit Packs
  48
- Power
  53
  - Single-Carrier Cabinets
    54
3. Management Terminals
56
4. Initialization and Recovery
84
5. Routine Maintenance Procedures
96
- Suppress Alarm Origination [y]
  96
- Handling Control Circuit Packs
  96
- TN790 Processor Circuit Pack (Memory)
  99
- Removing Power
  99
- Restoring Power
  101
- Troubleshooting Control Cabinet Power Units
  104
- Replacing Components (Release 5vs or Later)
  105
  - Power Supply
    106
  - Fans
    108
- System Backup
  109
  - Save Translation
    109
  - Save Recorded Announcements
    110
  - Translation Card Backup
    110
  - Translation Card Errors
    112
- Software Upgrade
  114
- Preventive Maintenance Procedures
  131
  - Air Filters
    131
  - Tape Head/Capstan
    131
  - Batteries
    131
  - Preventive Maintenance Log
    131
- System Features
  132
- Troubleshooting Backplane Voltage Problems
  157
- Troubleshooting Multimedia Call Handling (MMCH)
  157
  - 64 Kbps Calls Terminate but Far End Receives 56 Kb...
    158
    - Description
      158
    - Solution
      158
  - Calls Terminate with No Audio
    158
    - Description
      158
    - Solution
      158
  - Some Parties Cannot Be Heard by Others (Audio Subs...
    159
    - Description
      159
    - Solution
      159
  - Calls Terminate with No Video
    159
    - Description
      159
    - Solution
      159
  - Calls Terminate Correctly but Are Unstable
    160
    - Description
      160
    - Synchronization
      160
    - Network Configuration Concerns with Synchronizatio...
      160
    - Expansion Interface Duplication
      161
    - PRI D-Channel Backup
      161
    - Processor Duplication on the PBX
      161
  - Voice-Activated Switching Problems
    161
  - No Switching, Full Motion Video
    161
  - Video Never Switches to a Particular Party
    162
    - Description
      162
    - Solution
      162
  - Audio Echo
    163
  - Rate Adaptation
    163
  - Endpoint or I-MUX in Loopback Mode
    164
- Install DS1 CPE Loopback Jack (T1 Only)
  164
  - Loopback Jack Installation
    165
  - Administration
    165
  - DS1 Span Test
    166
  - Loopback Jack Fault Isolation Procedures
    169
    - Configurations Using a Smart Jack
      169
  - Configurations Without a Smart Jack
    173
  - Configurations Using Fiber Multiplexers
    177
  - Operating Charasteristics
    177
6. Reliability Systems: A Maintenance Aid
178
7. LED Interpretation
212
8. Maintenance Commands and Trouble-Clearing Aids
220
- busyout access-endpoint
  220
  - Synopsis
    220
  - Permissions
    220
  - Examples
    221
  - Description
    221
    - Defaults
      221
    - Parameters
      221
    - Help Messages
      222
    - Error Messages
      222
  - Output
    223
  - Feature Interactions
    223
- busyout board
  223
  - Synopsis
    224
  - Permissions
    224
  - Examples
    224
  - Description
    224
    - Defaults
      224
    - Parameters
      225
    - Help Messages
      225
    - Error Messages
      225
  - Output
    226
  - Feature Interactions
    227
- busyout cdr-link
  227
  - Synopsis
    227
  - Permissions
    227
  - Examples
    227
  - Description
    227
    - Defaults
      228
    - Parameters
      228
    - Help Messages
      228
    - Error Messages
      228
  - Output
    229
  - Feature Interactions
    229
- busyout data-module
  229
  - Synopsis
    229
  - Permissions
    230
  - Examples
    230
  - Description
    230
    - Defaults
      230
    - Parameters
      230
    - Help Messages
      230
    - Error Messages
      230
  - Output
    232
  - Feature Interactions
    232
- busyout journal-printer
  232
  - Synopsis
    232
  - Permissions
    233
  - Examples
    233
  - Description
    233
    - Defaults
      233
    - Parameters
      234
    - Help Messages
      234
    - Error Message
      234
  - Output
    234
  - Feature Interactions
    235
- busyout link
  235
  - Synopsis
    235
  - Permissions
    235
  - Examples
    235
  - Description
    235
    - Defaults
      236
    - Parameters
      236
    - Help Messages
      236
    - Error Messages
      236
  - Output
    237
  - Feature Interactions
    237
- busyout mis
  237
  - Synopsis
    237
  - Permissions
    237
  - Examples
    238
  - Description
    238
    - Defaults
      238
    - Parameters
      238
    - Help Messages
      238
    - Error Messages
      238
  - Output
    239
  - Feature Interactions
    239
- busyout modem-pool
  239
  - Synopsis
    239
  - Permissions
    239
  - Examples
    240
  - Description
    240
    - Defaults
      240
    - Parameters
      240
    - Help Messages
      240
    - Error Messages
      240
  - Output
    241
  - Feature Interactions
    242
- busyout packet-control
  242
  - Synopsis
    242
  - Permissions
    242
  - Examples
    242
  - Description
    242
    - Defaults
      243
    - Parameters
      243
    - Help Messages
      243
    - Error Messages
      243
  - Output
    244
  - Feature Interactions
    244
- busyout pms-link
  244
  - Synopsis
    245
  - Permissions
    245
  - Examples
    245
  - Description
    245
    - Defaults
      245
    - Parameters
      245
    - Help Messages
      246
    - Error Messages
      246
  - Output
    246
  - Feature Interactions
    247
- busyout port
  247
  - Synopsis
    247
  - Permissions
    247
  - Examples
    247
  - Description
    247
    - Defaults
      247
    - Parameters
      248
    - Help Messages
      248
    - Error Messages
      248
  - Output
    249
  - Feature Interactions
    249
- busyout pri-endpoint
  250
  - Synopsis
    250
  - Permissions
    250
  - Examples
    250
  - Description
    250
    - Defaults
      250
    - Parameters
      250
    - Help Messages
      250
    - Error Messages
      251
  - Output
    252
  - Feature Interactions
    252
- busyout sp-link
  252
  - Synopsis
    253
  - Permissions
    253
  - Examples
    253
  - Description
    253
    - Defaults
      253
    - Parameters
      253
    - Help Messages
      253
    - Error Messages
      253
  - Output
    254
  - Feature Interactions
    254
- busyout spe-standby
  254
  - Synopsis
    255
  - Permissions
    255
  - Examples
    255
  - Description
    255
    - Defaults
      255
    - Parameters
      255
    - Help Messages
      255
    - Error Messages
      256
  - Output
    256
  - Feature Interactions
    256
- busyout station
  257
  - Synopsis
    257
  - Permissions
    257
  - Examples
    257
  - Description
    257
    - Defaults
      257
    - Parameters
      258
    - Help Messages
      258
    - Error Messages
      258
  - Output
    259
  - Feature Interactions
    259
- busyout tdm
  259
  - Synopsis
    259
  - Permissions
    260
  - Examples
    260
  - Description
    260
    - Defaults
      260
    - Parameters
      260
    - Help Messages
      260
    - Error Messages
      260
  - Output
    261
  - Feature Interactions
    262
- busyout tone-clock
  262
  - Synopsis
    262
  - Permissions
    262
  - Examples
    262
  - Description
    262
    - Defaults
      262
    - Parameters
      263
    - Help Messages
      263
    - Error Messages
      263
  - Output
    264
  - Feature Interactions
    264
- busyout trunk
  264
  - Synopsis
    265
  - Permissions
    265
  - Examples
    265
  - Description
    265
    - Defaults
      265
    - Parameters
      266
    - Help Messages
      266
    - Error Messages
      266
  - Output
    267
  - Feature Interactions
    267
- cancel hardware-group
  267
  - Synopsis
    267
  - Permissions
    268
  - Examples
    268
  - Description
    268
    - Defaults
      268
    - Parameters
      268
    - Help Messages
      268
    - Error Messages
      269
  - Output
    269
  - Feature Interactions
    269
    - Scheduled and Periodic Maintenance
      269
    - Status Hardware-group
      269
- change circuit-packs
  269
  - Synopsis
    270
  - Permissions
    270
  - Examples
    270
  - Description
    270
    - Defaults
      270
    - Parameters
      270
    - Help Messages
      270
    - Error Messages
      271
  - Output
    271
  - Feature Interactions
    274
- change synchronization
  274
  - Synopsis
    274
  - Permissions
    274
  - Examples
    274
  - Description
    275
    - Defaults
      275
    - Parameters
      275
    - Help Messages
      275
    - Error Messages
      275
  - Output/INPUT
    276
  - Feature Interactions
    277
- change system-parameters maintenance
  278
  - Examples
    278
  - Output
    278
  - Operations Support Parameters
    279
  - Scheduled Maintenance
    282
  - Modem Connection
    286
- clear audits
  291
  - Synopsis
    291
  - Permissions
    291
  - Examples
    291
  - Description
    292
    - Defaults
      292
    - Parameters
      292
    - Help Messages
      292
    - Error Messages
      292
  - Output
    292
  - Feature Interactions
    293
- clear errors
  293
  - Synopsis
    293
  - Permissions
    293
  - Examples
    293
  - Description
    293
    - Defaults
      293
    - Parameters
      294
    - Help Messages
      294
    - Error Messages
      294
  - Output
    294
  - Feature Interactions
    294
- clear interface
  294
  - Synopsis
    295
  - Permissions
    295
  - Examples
    295
  - Description
    295
    - Defaults
      295
    - Parameters
      295
    - Help Messages
      295
    - Error Messages
      295
  - Output
    296
  - Feature Interactions
    296
- clear isdn-testcall
  296
  - Synopsis
    297
  - Permissions
    297
  - Examples
    297
  - Description
    297
    - Defaults
      297
    - Parameters
      297
    - Help Messages
      297
    - Error Messages
      297
  - Output
    298
  - Feature Interactions
    298
- clear link
  299
  - Synopsis
    299
  - Permissions
    299
  - Examples
    299
  - Description
    299
    - Defaults
      299
    - Parameters
      299
    - Help Messages
      299
    - Error Messages
      299
  - Output
    300
  - Feature Interactions
    300
- clear mst
  300
  - Synopsis
    300
  - Permissions
    300
  - Examples
    301
  - Description
    301
    - Defaults
      301
    - Parameters
      301
    - Help Messages
      301
    - Error Messages
      301
  - Output
    301
  - Feature Interactions
    301
- clear pkt
  301
  - Synopsis
    302
  - Permissions
    302
  - Examples
    302
  - Description
    302
    - Parameters
      302
    - Help Messages
      302
    - Error Messages
      302
- clear port
  303
  - Synopsis
    303
  - Permissions
    303
  - Examples
    303
  - Description
    303
    - Parameters
      303
    - Help Messages
      303
    - Error Messages
      303
  - Output
    304
  - Feature Interactions
    304
- copy update-file
  304
  - Synopsis
    304
  - Permissions
    304
  - Examples
    304
  - Description
    305
    - Parameters
      305
    - Help Messages
      305
    - Error Messages
      305
  - Output
    306
  - Feature Interactions
    306
- disable administered-connection
  306
  - Synopsis
    307
  - Permissions
    307
  - Examples
    307
  - Description
    307
    - Defaults
      307
    - Parameters
      307
    - Help Messages
      307
    - Error Messages
      307
  - Output
    308
  - Feature Interactions
    308
- disable mst
  308
  - Synopsis
    308
  - Permissions
    308
  - Examples
    309
  - Description
    309
    - Defaults
      309
    - Parameters
      309
    - Help Messages
      309
    - Error Messages
      309
  - Output
    309
  - Feature Interactions
    310
- disable suspend-alm-orig
  310
  - Synopsis
    310
  - Examples
    310
  - Description
    310
    - Defaults
      310
    - Parameter
      310
    - Help Messages
      310
  - Output
    311
  - Feature Interactions
    311
- disable synchronization-switch
  311
  - Synopsis
    311
  - Permissions
    311
  - Examples
    311
  - Description
    311
    - Defaults
      312
    - Parameters
      312
    - Help Messages
      312
    - Error Messages
      312
  - Output
    312
  - Feature Interactions
    312
- disable test-number
  313
  - Synopsis
    313
  - Permissions
    313
  - Examples
    313
  - Description
    313
    - Parameters
      313
    - Help Messages
      313
    - Error Messages
      314
  - Output
    314
  - Feature Interactions
    314
- display alarms
  314
  - Synopsis
    314
  - Permissions
    315
  - Examples
    315
  - Description
    315
    - System Reboots and the Error and Alarm Logs
      316
    - Defaults
      316
    - Parameters
      317
  - Backward Paging of the Alarm/Error Log
    317
    - Help Messages
      317
    - Error Messages
      318
  - FORM INPUT
    318
    - Field Help
      320
    - Field Error Messages
      321
  - FORM Output
    322
  - Feature Interactions
    323
- display cabinet
  324
- display communication-interface
  326
  - Output for Hop-channels qualifier
    327
    - Output for Links Object
      327
    - Output for Processor-Channel Object
      330
- display disabled-tests
  331
  - Output
    331
- display errors
  331
  - Synopsis
    331
  - Permissions
    331
  - Examples
    332
  - Description
    332
    - System Reboots and the Error and Alarm Logs
      332
    - Defaults
      333
    - Parameters
      333
  - Backward Paging of the Alarm/Error Log
    333
    - Help Messages
      334
    - Error Messages
      334
  - FORM INPUT
    334
    - Field Help
      336
    - Field Error Messages
      339
  - FORM Output
    340
    - Example of Error Log Display without the High-Reso...
      342
    - Example of Error Log Display with the High-Resolut...
      342
  - Feature Interactions
    343
- display events
  343
  - Input Form
    343
  - Output
    344
- display initcauses
  345
  - Synopsis
    345
  - Permissions
    345
  - Examples
    345
  - Description
    345
    - Defaults
      346
    - Parameters
      346
    - Help Messages
      346
    - Error Messages
      346
  - Output
    347
  - Feature Interactions
    351
- display memory-configuration
  351
  - Synopsis
    351
  - Permissions
    352
  - Examples
    352
  - Description
    352
    - Defaults
      352
    - Parameters
      352
    - Help Messages
      352
    - Error Messages
      353
  - Output
    353
  - Feature Interactions
    354
- display port
  354
  - Synopsis
    354
  - Permissions
    354
  - Examples
    355
  - Description
    355
    - Defaults
      355
    - Parameters
      355
    - Help Messages
      355
    - Error Messages
      355
  - Output
    356
  - Feature Interactions
    356
- display synchronization
  356
  - Synopsis
    357
  - Permissions
    357
  - Examples
    357
  - Description
    357
    - Defaults
      357
    - Parameters
      357
    - Help Messages
      357
    - Error Messages
      358
  - Output
    358
  - Feature Interactions
    359
- display system-parameters maintenance
  359
  - Synopsis
    359
  - Permissions
    360
  - Examples
    360
  - Description
    360
  - Parameters
    360
    - Help Messages
      360
  - Output
    361
    - Scheduled Maintenance
      363
    - Modem Connection
      367
- display time
  371
  - Synopsis
    372
  - Permissions
    372
  - Examples
    372
  - Description
    372
    - Defaults
      372
    - Parameters
      372
    - Help Messages
      372
    - Error Messages
      373
  - Output
    373
  - Feature Interactions
    373
- download update-file
  373
  - Synopsis
    374
  - Permissions
    374
  - Examples
    374
  - Description
    374
    - Help Messages
      375
    - Error Messages
      375
  - Output
    376
  - Feature Interactions
    376
  - RECOVERY PROCEDURES
    377
- enable administered-connection
  379
  - Synopsis
    379
  - Permissions
    379
  - Examples
    379
  - Description
    379
    - Defaults
      380
    - Parameters
      380
    - Help Messages
      380
    - Error Messages
      380
  - Output
    381
  - Feature Interactions
    381
- enable mst
  381
  - Synopsis
    381
  - Permissions
    381
  - Examples
    381
  - Description
    381
  - Defaults
    381
  - Parameters
    381
  - Help Messages
    382
  - Error Messages
    382
  - Output
    382
  - Feature Interactions
    382
- enable suspend-alm-orig
  382
  - Synopsis
    382
  - Examples
    382
  - Description
    382
    - Defaults
      383
    - Parameter
      383
    - Help Messages
      383
    - Output
      384
  - Feature Interactions
    384
- enable synchronization-switch
  384
  - Synopsis
    384
  - Permissions
    384
  - Examples
    384
  - Description
    384
    - Defaults
      385
    - Parameters
      385
    - Help Messages
      385
    - Error Messages
      385
  - Output
    385
  - Feature Interactions
    385
- enable test-number
  386
  - Synopsis
    386
  - Permissions
    386
  - Examples
    386
  - Description
    386
    - Defaults
      386
    - Parameters
      386
    - Help Messages
      386
    - Error Messages
      386
  - Output
    387
  - Feature Interactions
    387
- format card-mem
  387
  - Synopsis
    387
  - Permissions
    387
  - Examples
    387
  - Description
    388
    - Defaults
      388
    - Parameters
      388
    - Help Messages
      388
    - Error Messages
      388
  - Output
    389
  - Feature Interactions
    389
- get vector
  389
  - Synopsis
    389
  - Permissions
    389
  - Examples
    390
  - Description
    390
    - Defaults
      390
    - Parameters
      390
    - Help Messages
      390
    - Error Messages
      390
  - Output
    391
  - Feature Interactions
    392
- list configuration
  392
  - Parameters
    393
  - Examples
    393
  - Output
    393
  - Assigned Ports
    394
- list config software-version
  395
  - Parameters
    396
  - Output
    396
    - UPDATE FILE Section
      396
    - SOFTWARE VERSION Section
      397
    - TRANSLATION DATE Section
      397
    - PI FW VERSION Section
      397
    - ANNOUNCEMENT DATE Section
      398
    - PKT-CTRL FW VERSION Section
      398
- list disabled-mos
  402
  - Synopsis
    402
  - Permissions
    402
  - Examples
    402
  - Description
    402
    - Defaults
      402
    - Parameters
      403
    - Help Messages
      403
    - Error Messages
      403
  - Output
    403
  - Feature Interactions
    404
- list history
  404
  - Synopsis
    404
  - Permissions
    404
  - Examples
    404
  - Description
    404
    - Defaults
      405
    - Parameters
      405
    - Help Messages
      405
    - Error Messages
      405
  - Output
    405
  - Feature Interactions
    407
- list isdn-testcall
  407
  - Synopsis
    408
  - Permissions
    408
  - Examples
    408
  - Description
    408
    - Defaults
      408
    - Parameters
      408
    - Help Messages
      409
    - Error Messages
      409
  - Output
    409
  - Feature Interactions
    409
- list marked-ports
  410
  - Synopsis
    410
  - Permissions
    410
  - Examples
    410
  - Description
    410
    - Defaults
      410
    - Parameters
      410
    - Help Messages
      411
    - Error Messages
      411
  - Output
    411
  - Feature Interactions
    411
- list measurements
  412
  - Synopsis
    412
  - Permissions
    412
  - Examples
    412
  - Description
    412
    - Defaults
      412
    - Parameters
      413
    - Help Messages
      413
    - Error Messages
      413
  - Output
    414
  - Feature Interactions
    416
- list mst
  416
  - Synopsis
    416
  - Permissions
    417
  - Examples
    417
  - Description
    417
    - Defaults
      417
    - Parameters
      417
    - Help Messages
      418
    - Error Messages
      418
  - Output
    418
  - Interpretation of Output
    419
    - Summary of MST Message Types
      419
  - Detailed description of Messages**
    421
  - Vector Trace
    422
  - Vector Event Trace (D92 Only)
    422
  - IMT (D92)
    423
    - 0x21 - IMT proc_errs
      423
    - 0x22 - IMT crec
      423
    - 0x23 - MT_IMT (miscellaneous IMT hooks)
      424
    - 0x40 - internal message tracing of call_p, conn_m,...
      424
  - CCMS
    425
  - Packet (D92)
    426
  - ASAI
    426
    - 0x50 - ASAI level 2 uplink primitive
      427
    - 0x51 - ASAI level 2 downlink primitive
      428
    - 0x52 - ASAI maintenance uplink
      431
    - 0x53 - ASAI maintenance downlink
      431
    - 0x54 - ASAI unrecognized uplink
      431
    - 0x55 - ASAI unrecognized downlink
      432
    - 0x56 - ASAI association uplink
      432
    - 0x57 - ASAI Association downlink
      433
    - 0x58 - ASAI error uplink
      433
  - ISDN
    434
    - 0x60 - ISDN PRI uplink
      434
    - 0x62 - ISDN PRI downlink
      434
    - 0x64 - ISDN BRI uplink
      435
    - 0x66 - ISDN BRI downlink
      435
    - 0x68 - ISDN BRI level 2 uplink primitive
      436
    - 0x6A - ISDN BRI level 2 downlink primitive
      438
    - 0x6C - ISDN PRI level 2 uplink primitive
      439
    - 0x6E - ISDN PRI Unrecognized Messages
      440
    - 0x6F - ISDN BRI Unrecognized Messages
      440
  - General
    441
    - 0x71 - GAP marker
      441
    - 0x72 - Time changed while trace enabled
      442
  - X.25 Application Data
    442
    - 0xA0 - X.25 outgoing application message
      442
    - 0xA1 - X.25 incoming application message
      442
  - Application Control
    443
    - 0xA2 - X.25 application error or notification
      443
  - Session Layer Control
    443
    - 0xB0 - X.25 outgoing session layer control message...
      444
    - 0xB1 - X.25 incoming session layer control message...
      444
    - 0xCF - message confirmation
      445
  - Processor Channel Control
    445
    - 0xD0 - outgoing control message
      445
  - Link Control
    446
    - 0xD2 - link control
      446
    - 0xD3 - link status (R3 Only)
      446
  - Session Sanity
    446
    - 0xE2 - X.25 Session Timer Expirations
      446
  - X.25 Errors
    448
    - 0xF0 - X.25 Error Message (Outgoing Message Lost)
      448
    - 0xF1 - Unrecognized X.25 Messages
      449
    - 0xF2 - BX.25 Error Message (DIP ICOM Record Aborte...
      449
  - Feature Interactions
    449
- list suspend-alm-orig
  449
  - Synopsis
    449
  - Examples
    449
  - Description
    449
    - Parameters
      450
    - Help Messages
      450
  - Output
    450
  - Feature Interactions
    450
- list testcalls
  450
  - Synopsis
    451
  - Permissions
    451
  - Examples
    451
  - Description
    452
    - Defaults
      452
    - Parameters
      452
    - Help Messages
      453
    - Error Messages
      454
  - DETAIL REPORT Output
    455
  - SUMMARY REPORT Output
    457
- mark port
  457
  - Synopsis
    458
  - Permissions
    458
  - Examples
    458
  - Description
    458
    - Defaults
      458
    - Parameters
      458
    - Help Messages
      458
    - Error Messages
      459
  - Output
    459
  - Feature Interactions
    459
- monitor bcms
  459
  - Synopsis
    459
  - Permissions
    459
  - Examples
    459
  - Description
    460
    - Defaults
      460
    - Parameters
      460
    - Help Messages
      460
    - Error Messages
      461
  - Output
    461
  - Feature Interactions
    464
- monitor health
  465
  - Synopsis
    465
  - Permissions
    465
  - Examples
    465
  - Description
    465
    - Defaults
      465
    - Parameters
      465
    - Help Messages
      465
    - Error Messages
      465
  - Output
    466
  - Feature Interactions
    468
- monitor security-violations
  469
  - Synopsis
    469
  - Permissions
    469
  - Examples
    469
  - Description
    469
    - Defaults
      469
    - Parameters
      469
    - Help Messages
      469
    - Error Messages
      470
  - Output
    470
  - Feature Interactions
    471
- monitor system
  471
  - Synopsis
    471
  - Permissions
    472
  - Examples
    472
  - Description
    472
    - Defaults
      472
    - Parameters
      473
    - Help Messages
      473
    - Error Messages
      473
  - Output
    474
  - Output
    476
  - Feature Interactions
    479
- monitor traffic
  479
  - Synopsis
    479
  - Permissions
    479
  - Examples
    479
  - Description
    480
    - Defaults
      480
    - Parameters
      480
    - Help Messages
      480
    - Error Messages
      480
  - Output
    481
  - Feature Interactions
    482
- monitor trunk
  482
  - Synopsis
    482
  - Permissions
    482
  - Examples
    482
  - Description
    482
    - Defaults
      483
    - Parameters
      483
    - Help Messages
      483
    - Error Messages
      483
  - Output
    484
  - Feature Interactions
    484
- recycle carrier
  485
  - Synopsis
    485
  - Permissions
    485
  - Examples
    485
  - Description
    485
    - Defaults
      485
    - Parameters
      485
    - Help Messages
      486
    - Error Messages
      486
  - Output
    486
  - Feature Interactions
    487
- refresh spe-standby
  487
  - Synopsis
    488
  - Permissions
    488
  - Examples
    488
  - Description
    488
    - Defaults
      488
    - Parameters
      489
    - Help Messages
      489
    - Error Messages
      489
  - Output
    489
  - Feature Interactions
    490
- release access-endpoint
  490
  - Synopsis
    490
  - Permissions
    490
  - Examples
    490
  - Description
    490
    - Defaults
      491
    - Parameters
      491
    - Help Messages
      491
    - Error Messages
      491
  - Output
    492
  - Feature Interactions
    492
- release board
  493
  - Synopsis
    493
  - Permissions
    493
  - Examples
    493
  - Description
    493
    - Defaults
      493
    - Parameters
      493
    - Help Messages
      493
    - Error Messages
      494
  - Output
    495
  - Feature Interactions
    495
- release cdr-link
  495
  - Synopsis
    496
  - Permissions
    496
  - Examples
    496
  - Description
    496
    - Defaults
      496
    - Parameters
      496
    - Help Messages
      496
    - Error Messages
      497
  - Output
    497
  - Feature Interactions
    498
- release data-module
  498
  - Synopsis
    498
  - Permissions
    498
  - Examples
    498
  - Description
    498
    - Defaults
      498
    - Parameters
      498
    - Help Messages
      498
    - Error Messages
      499
  - Output
    500
  - Feature Interactions
    500
- release journal-printer
  500
  - Synopsis
    500
  - Permissions
    501
  - Examples
    501
  - Description
    501
    - Defaults
      501
    - Parameters
      501
    - Help Messages
      501
  - Output
    502
  - Feature Interactions
    502
- release link
  503
  - Synopsis
    503
  - Permissions
    503
  - Examples
    503
  - Description
    503
    - Defaults
      503
    - Parameters
      503
    - Help Messages
      503
    - Error Messages
      503
  - Output
    504
  - Feature Interactions
    504
- release mis
  505
  - Synopsis
    505
  - Permissions
    505
  - Examples
    505
  - Description
    505
    - Defaults
      505
    - Parameters
      505
    - Help Messages
      505
  - Output
    506
  - Feature Interactions
    506
- release modem-pool
  506
  - Synopsis
    507
  - Permissions
    507
  - Examples
    507
  - Description
    507
    - Defaults
      507
    - Parameters
      507
    - Help Messages
      507
    - Error Messages
      507
  - Output
    508
  - Feature Interactions
    509
- release packet-control
  509
  - Synopsis
    509
  - Permissions
    509
  - Examples
    509
  - Description
    510
    - Defaults
      510
    - Parameters
      510
    - Help Messages
      510
    - Error Messages
      510
  - Output
    511
  - Feature Interactions
    512
- release pms-link
  512
  - Synopsis
    512
  - Permissions
    512
  - Examples
    512
  - Description
    513
    - Defaults
      513
    - Parameters
      513
    - Help Messages
      513
  - Output
    514
  - Feature Interactions
    514
- release port
  514
  - Synopsis
    514
  - Permissions
    515
  - Examples
    515
  - Description
    515
    - Defaults
      515
    - Parameters
      515
    - Help Messages
      515
    - Error Messages
      515
  - Output
    516
  - Feature Interactions
    517
- release pri-endpoint
  517
  - Synopsis
    517
  - Permissions
    517
  - Examples
    517
  - Description
    517
    - Defaults
      518
    - Parameters
      518
    - Help Messages
      518
    - Error Messages
      518
  - Output
    519
  - Feature Interactions
    519
- release sp-link
  519
  - Synopsis
    520
  - Permissions
    520
  - Examples
    520
  - Description
    520
    - Defaults
      520
    - Parameters
      520
    - Help Messages
      520
    - Error Messages
      520
  - Output
    521
  - Feature Interactions
    521
- release spe-standby
  521
  - Synopsis
    521
  - Permissions
    522
  - Examples
    522
  - Description
    522
    - Defaults
      522
    - Parameters
      522
    - Help Messages
      522
    - Error Messages
      522
  - Output
    523
  - Feature Interactions
    523
- release station
  523
  - Synopsis
    523
  - Permissions
    524
  - Examples
    524
  - Description
    524
    - Defaults
      524
    - Parameters
      524
    - Help Messages
      524
    - Error Messages
      524
  - Output
    525
  - Feature Interactions
    526
- release tdm
  526
  - Synopsis
    526
  - Permissions
    526
  - Examples
    526
  - Description
    526
    - Defaults
      527
    - Help Messages
      527
    - Error Messages
      527
  - Output
    528
  - Feature Interactions
    528
- release tone-clock
  529
  - Synopsis
    529
  - Permissions
    529
  - Examples
    529
  - Description
    529
    - Defaults
      529
    - Parameters
      529
    - Help Messages
      529
    - Error Messages
      529
  - Output
    531
  - Feature Interactions
    531
- release trunk
  531
  - Synopsis
    531
  - Permissions
    531
  - Examples
    532
  - Description
    532
    - Defaults
      532
    - Parameters
      532
    - Help Messages
      532
    - Error Messages
      532
  - Output
    533
  - Feature Interactions
    534
- reset board
  534
  - Synopsis
    534
  - Permissions
    534
  - Examples
    534
  - Description
    534
    - Defaults
      535
    - Parameters
      535
    - Help Messages
      535
    - Error Messages
      535
  - Output
    536
  - Feature Interactions
    536
- reset interface
  537
  - Synopsis
    537
  - Permissions
    537
  - Examples
    537
  - Description
    537
    - Defaults
      537
    - Parameters
      538
    - Help Messages
      538
    - Error Messages
      538
  - Output
    539
  - Feature Interactions
    539
- reset maintenance
  540
  - Synopsis
    540
  - Permissions
    540
  - Examples
    540
  - Description
    540
    - Defaults
      540
    - Parameters
      540
    - Help Messages
      540
    - Error Messages
      541
  - Output
    541
  - Feature Interactions
    541
- reset spe-standby
  542
  - Synopsis
    542
  - Permissions
    542
  - Examples
    542
  - Description
    542
    - Defaults
      542
    - Parameters
      542
    - Help Messages
      543
    - Error Messages
      543
  - Output
    543
  - Feature Interactions
    544
- reset system
  544
  - Synopsis
    544
  - Permissions
    544
  - Examples
    544
  - Description
    544
    - Defaults
      545
    - Parameters
      545
    - Help Messages
      547
    - Error Messages
      547
  - Output
    548
  - Feature Interactions
    549
- restore announcements
  549
  - Synopsis
    549
  - Permissions
    549
  - Examples
    549
  - Description
    549
    - Defaults
      549
    - Parameters
      550
    - Help Messages
      550
    - Error Messages
      550
  - Output
    551
  - Feature Interactions
    551
- resume hardware-group
  552
  - Synopsis
    553
  - Permissions
    553
  - Examples
    553
  - Description
    553
    - Defaults
      553
    - Parameters
      553
    - Help Messages
      553
    - Error Messages
      554
  - Output
    554
  - Feature Interactions
    554
    - Cancel hardware-group
      554
- save announcements
  555
  - Synopsis
    555
  - Permissions
    555
  - Examples
    555
  - Description
    555
    - Simplex
      555
    - Duplex
      556
    - Parameters
      556
    - Help Messages
      556
    - Error Messages
      556
  - Output
    558
  - Feature Interactions
    558
- save translation
  559
  - Synopsis
    559
  - Permissions
    560
  - Examples
    560
  - Description
    560
    - Simplex
      560
    - Duplex
      560
    - Parameters
      560
    - Help Messages
      560
    - Error Messages
      560
  - Output
    561
  - Feature Interactions
    561
- set expansion-link
  562
  - Synopsis
    562
  - Permissions
    562
  - Examples
    562
  - Description
    562
    - Defaults
      562
    - Parameters
      562
    - Help Messages
      562
    - Error Messages
      563
  - Output
    564
  - Feature Interactions
    564
- set options
  564
  - Synopsis
    564
  - Permissions
    564
  - Examples
    564
  - Description
    564
    - Defaults
      565
    - Parameters
      565
    - Help Messages
      565
    - Error Messages
      565
  - Form Input
    565
    - Field Help
      571
    - Field Error Messages
      571
  - Output
    572
  - Feature Interactions
    572
- set signaling-group
  572
  - Synopsis
    572
  - Permissions
    572
  - Examples
    572
  - Description
    572
    - Defaults
      573
    - Parameters
      573
    - Help Messages
      573
    - Error Messages
      573
  - Output
    573
  - Feature Interactions
    574
- set synchronization
  574
  - Synopsis
    574
  - Permissions
    574
  - Examples
    574
  - Description
    574
    - Defaults
      575
    - Parameters
      575
    - Help Messages
      575
    - Error Messages
      575
  - Output
    576
  - Feature Interactions
    576
- set tdm
  576
  - Synopsis
    576
  - Permissions
    576
  - Examples
    576
  - Description
    577
    - Defaults
      577
    - Parameters
      577
    - Help Messages
      577
    - Error Messages
      577
  - Output
    578
  - Feature Interactions
    579
- set time
  579
  - Synopsis
    579
  - Permissions
    579
  - Examples
    579
  - Description
    579
    - Defaults
      580
    - Parameters
      580
    - Help Messages
      581
    - Error Messages
      581
  - FORM INPUT
    581
    - Field Help
      582
    - Field Error Messages
      583
  - Output
    583
  - Feature Interactions
    583
- set tone-clock
  583
  - Synopsis
    583
  - Permissions
    583
  - Examples
    584
  - Description
    584
    - Defaults
      584
    - Parameters
      584
    - Help Messages
      584
    - Error Messages
      584
- set vector
  586
  - Synopsis
    586
  - Permissions
    586
  - Examples
    586
  - Description
    587
    - Defaults
      587
    - Parameters
      588
    - Help Messages
      590
    - Error Messages
      590
  - Output
    591
- status access-endpoint
  591
  - Synopsis
    591
  - Permissions
    592
  - Examples
    592
  - Description
    592
    - Defaults
      592
    - Parameters
      592
    - Help Messages
      592
    - Error Messages
      592
  - Output
    593
  - Feature Interactions
    594
- status administered-connection
  594
  - Synopsis
    594
  - Permissions
    594
  - Examples
    594
  - Description
    594
    - Parameters
      595
    - Help Messages
      595
    - Error Messages
      595
  - Output
    596
  - Feature Interactions
    596
- status attendant
  597
  - Synopsis
    597
  - Permissions
    597
  - Examples
    597
  - Description
    597
    - Defaults
      597
    - Parameters
      597
    - Help Messages
      597
    - Error Messages
      597
  - Output
    598
  - Feature Interactions
    599
- status audits
  599
  - Synopsis
    599
  - Permissions
    599
  - Examples
    599
  - Description
    599
    - Defaults
      600
    - Parameters
      601
    - Help Messages
      601
    - Error Messages
      601
  - Output
    602
  - Feature Interactions
    605
  - TABLE OF AUDITS
    605
- status bri-port
  609
  - Synopsis
    610
  - Permissions
    610
  - Examples
    610
  - Description
    610
    - Defaults
      610
    - Parameters
      610
    - Help Messages
      610
    - Error Messages
      610
  - Output
    612
  - STATUS INTERPRETATION SECTION
    614
  - Feature Interactions
    620
- status card-mem
  621
  - Synopsis
    621
  - Permissions
    621
  - Examples
    621
  - Description
    621
    - Defaults
      622
    - Parameters
      622
    - Help Messages
      622
    - Error Messages
      622
  - Output
    624
  - Feature Interactions
    626
- status cdr-link
  626
  - Synopsis
    626
  - Permissions
    626
  - Examples
    626
  - Description
    627
    - Defaults
      627
    - Parameters
      627
    - Help Messages
      627
    - Error Messages
      627
  - Output
    628
  - Feature Interactions
    628
- status cleared-alarm-notif
  628
  - Synopsis
    628
  - Examples
    628
  - Description
    629
    - Defaults
      629
    - Parameter
      629
    - Help Messages
      629
  - Output
    629
  - Feature Interactions
    629
- status conference
  629
  - Synopsis
    630
  - Permissions
    630
  - Examples
    630
  - Description
    630
  - Defaults
    630
  - Parameters
    631
  - Feature Interactions
    631
  - Output
    631
  - Field Descriptions (status conference, page 1)
    632
    - Field Descriptions (status conference, page 2)
      641
    - Field Descriptions (status conference endpoint)
      645
- status data-module
  670
  - Synopsis
    670
  - Permissions
    670
  - Examples
    670
  - Description
    670
    - Defaults
      671
    - Parameters
      671
    - Help Messages
      671
    - Error Messages
      671
  - Output
    672
  - Feature Interactions
    672
- status hardware-group
  673
  - Synopsis
    673
  - Permissions
    673
  - Examples
    673
  - Description
    673
    - Defaults
      673
    - Parameters
      673
    - Help Messages
      673
  - Output
    674
  - Feature Interactions
    675
- status health
  675
  - Synopsis
    675
  - Permissions
    675
  - Examples
    675
  - Description
    676
    - Defaults
      676
    - Parameters
      676
    - Help Messages
      676
    - Error Messages
      676
  - Output
    676
  - Feature Interactions
    679
- status interface
  679
  - Synopsis
    679
  - Permissions
    679
  - Examples
    679
  - Description
    680
    - Defaults
      680
    - Parameters
      680
    - Help Messages
      680
    - Error Messages
      680
  - Output
    681
  - Feature Interactions
    682
- status isdn-testcall
  682
  - Synopsis
    682
  - Permissions
    682
  - Examples
    682
  - Description
    682
    - Defaults
      682
    - Parameters
      682
    - Help Messages
      683
    - Error Messages
      683
  - Output
    684
  - Feature Interactions
    685
- status journal-link
  686
  - Synopsis
    686
  - Permissions
    686
  - Examples
    686
  - Description
    686
    - Defaults
      686
    - Parameters
      687
    - Help Messages
      687
    - Error Messages
      687
  - Output
    687
  - Feature Interactions
    687
- status link
  688
  - Synopsis
    688
  - Permissions
    688
  - Examples
    688
  - Description
    688
    - Defaults
      688
    - Parameters
      688
    - Help Messages
      688
    - Error Messages
      689
  - DEFINITIONS
    689
  - Output
    691
  - Feature Interactions
    697
- status logins
  697
  - Synopsis
    697
  - Permissions
    697
  - Examples
    697
  - Description
    698
    - Defaults
      698
    - Parameters
      698
    - Help Messages
      698
    - Error Messages
      698
  - Output
    698
  - Feature Interactions
    700
- status mst
  700
  - Synopsis
    700
  - Permissions
    700
  - Examples
    700
  - Description
    700
    - Parameters
      701
    - Help Messages
      701
    - Error Messages
      701
  - FORM Output
    701
  - Feature Interactions
    702
- status packet-control
  702
  - Synopsis
    702
  - Permissions
    702
  - Examples
    703
  - Description
    703
    - Defaults
      703
    - Parameters
      703
    - Help Messages
      703
    - Error Messages
      703
  - Output
    704
  - STATUS INTERPRETATION SECTION
    705
  - Feature Interactions
    705
- status periodic-scheduled
  705
  - Synopsis
    705
  - Permissions
    706
  - Examples
    706
  - Description
    706
    - Defaults
      706
    - Parameters
      706
    - Help Messages
      706
    - Error Messages
      706
  - Output
    707
  - Feature Interactions
    708
- status pms-link
  708
  - Synopsis
    708
  - Permissions
    708
  - Examples
    708
  - Description
    709
    - Defaults
      709
    - Parameters
      709
    - Help Messages
      709
    - Error Messages
      709
  - Output
    710
  - Feature Interactions
    710
- status pri-endpoint
  710
  - Synopsis
    710
  - Permissions
    710
  - Examples
    711
  - Description
    711
    - Defaults
      711
    - Parameters
      711
    - Help Messages
      711
    - Error Messages
      711
  - Output
    712
  - Feature Interactions
    714
- status processor-channel
  714
  - Synopsis
    714
  - Permissions
    714
  - Examples
    714
  - Description
    714
    - Defaults
      714
    - Parameters
      714
    - Help Messages
      715
    - Error Messages
      715
  - Output
    716
  - Feature Interactions
    717
- status signaling-group
  717
  - Synopsis
    717
  - Permissions
    717
  - Examples
    717
  - Description
    717
    - Defaults
      718
    - Parameters
      718
    - Help Messages
      718
    - Error Messages
      718
  - Output
    719
  - Feature Interactions
    721
- status sp-link
  721
  - Synopsis
    721
  - Permissions
    721
  - Examples
    721
  - Description
    721
    - Defaults
      722
    - Parameters
      722
    - Help Messages
      722
    - Error Messages
      722
  - Output
    723
  - Feature Interactions
    723
- status station
  723
  - Synopsis
    723
  - Permissions
    724
  - Examples
    724
  - Description
    724
    - Defaults
      724
    - Parameters
      724
    - Help Messages
      724
    - Error Messages
      724
    - Error Messages
      725
  - Output
    725
  - Feature Interactions
    726
- status synchronization
  726
  - Synopsis
    726
  - Permissions
    726
  - Examples
    727
  - Description
    727
    - Defaults
      727
    - Parameters
      727
    - Help Messages
      727
    - Error Messages
      727
  - Output
    728
  - Feature Interactions
    728
- status system
  728
  - Synopsis
    729
  - Permissions
    729
  - Examples
    729
  - Description
    729
    - Defaults
      729
    - Parameters
      729
    - Help Messages
      729
    - Error Messages
      730
  - Output
    730
  - Feature Interactions
    742
- status trunk
  742
  - Synopsis
    742
  - Permissions
    742
  - Examples
    743
  - Description
    743
    - Defaults
      743
    - Parameters
      743
    - Help Messages
      743
    - Error Messages
      743
  - MEMBER Output
    744
  - GROUP Output
    745
  - Feature Interactions
    746
- status tsc-administered
  746
  - Synopsis
    746
  - Permissions
    746
  - Examples
    746
  - Description
    746
    - Defaults
      747
    - Parameters
      747
    - Help Messages
      747
    - Error Messages
      747
  - Output
    748
  - Feature Interactions
    748
- status tti
  749
  - Synopsis
    749
  - Permissions
    749
  - Examples
    749
  - Description
    749
    - Defaults
      749
    - Parameters
      749
    - Help Messages
      749
    - Error Messages
      750
  - Output
    750
  - Feature Interactions
    751
- test access-endpoint
  751
  - Synopsis
    751
  - Permissions
    751
  - Examples
    751
  - Description
    752
    - Defaults
      752
    - Parameters
      752
    - Help Messages
      752
    - Error Messages
      752
  - Output
    753
  - Feature Interactions
    754
- test alarms
  754
  - Synopsis
    754
  - Permissions
    754
  - Examples
    754
  - Description
    755
    - Defaults
      755
    - Parameters
      756
    - Help Messages
      757
    - Error Messages
      757
  - QUERY FORM INPUT
    758
    - Field Help
      760
    - Field Error Messages
      761
  - Output
    762
  - Feature Interactions
    764
- test analog-testcall
  764
  - Synopsis
    764
  - Permissions
    764
  - Examples
    764
  - Description
    765
    - Defaults
      765
    - Parameters
      765
    - Help Messages
      766
    - Error Messages
      766
  - Output
    768
  - Feature Interactions
    768
- test board
  769
  - Synopsis
    769
  - Permissions
    769
  - Examples
    769
  - Description
    769
    - Defaults
      769
    - Parameters
      770
    - Help Messages
      770
    - Error Messages
      770
  - Output
    772
  - Feature Interactions
    772
- test card-mem
  773
  - Synopsis
    773
  - Permissions
    773
  - Examples
    773
  - Description
    773
    - Defaults
      774
    - Parameters
      775
    - Help Messages
      775
    - Error Messages
      776
  - Output
    777
  - Feature Interactions
    778
- test cdr-link
  778
  - Synopsis
    778
  - Permissions
    778
  - Examples
    778
  - Description
    778
    - Defaults
      779
    - Parameters
      779
    - Help Messages
      779
    - Error Messages
      779
  - Output
    780
  - Feature Interactions
    781
- test customer-alarm
  781
  - Synopsis
    781
  - Permissions
    781
  - Examples
    781
  - Description
    781
    - Defaults
      781
    - Parameters
      782
    - Help Messages
      782
    - Error Messages
      783
  - Output
    783
  - Feature Interactions
    783
- test data-module
  783
  - Synopsis
    784
  - Permissions
    784
  - Examples
    784
  - Description
    784
    - Defaults
      784
    - Parameters
      785
    - Help Messages
      785
    - Error Messages
      785
  - Output
    786
  - Feature Interactions
    787
- test ds1-loop
  787
  - Synopsis
    787
  - Permissions
    787
  - Examples
    788
  - Description
    788
    - Defaults
      788
    - Parameters
      789
    - Help Messages
      790
    - Error Messages
      790
    - Output
      791
    - Feature Interactions
      791
- test duplication-interface
  792
  - Synopsis
    792
  - Permissions
    792
  - Examples
    792
  - Description
    792
    - Defaults
      792
    - Parameters
      793
    - Help Messages
      793
    - Error Messages
      793
  - Output
    794
  - Feature Interactions
    795
- test eda-external-device-alrm
  795
  - Defaults
    796
  - Parameters
    797
  - Examples
    797
  - Output
    798
- test environment
  799
  - Synopsis
    799
  - Permissions
    799
  - Examples
    799
  - Description
    799
    - Defaults
      800
    - Parameters
      800
    - Help Messages
      800
    - Error Messages
      801
  - Output
    801
  - Feature Interactions
    802
- test hardware-group
  803
  - Synopsis
    803
  - Permissions
    803
  - Examples
    803
  - Description
    803
    - Defaults
      804
    - Parameters
      804
    - Help Messages
      805
    - Error Messages
      805
  - FORM INPUT
    806
    - Field Help
      809
    - Field Error Message
      810
  - Output
    810
  - Feature Interactions
    813
    - Test hardware-group
      813
    - TTI
      813
    - Add Station
      813
    - Trunk Administration
      813
    - Save Translation
      813
    - Hardware Alarms
      813
    - System Interaction
      814
    - Scheduled and Periodic maintenance
      814
- test inads-link
  814
  - Synopsis
    814
  - Permissions
    814
  - Examples
    814
  - Description
    814
    - Defaults
      815
    - Parameter
      815
    - Help Messages
      815
  - Output
    816
  - Feature Interactions
    816
- test interface
  816
  - Synopsis
    816
  - Permissions
    816
  - Examples
    817
  - Description
    817
    - Defaults
      817
    - Parameters
      817
    - Help Messages
      818
    - Error Messages
      818
  - Output
    820
  - Feature Interactions
    820
- test isdn-testcall
  820
  - Synopsis
    820
  - Permissions
    821
  - Examples
    821
  - Description
    821
    - Defaults
      821
    - Parameters
      821
    - Help Messages
      821
    - Error Messages
      822
  - Output
    823
  - Feature Interactions
    823
- test journal-printer
  824
  - Synopsis
    824
  - Permissions
    824
  - Examples
    824
  - Description
    824
    - Defaults
      824
    - Parameters
      825
    - Help Messages
      825
    - Error Messages
      825
  - Output
    826
  - Feature Interactions
    827
- test led
  827
  - Synopsis
    827
  - Permissions
    827
  - Examples
    827
  - Description
    827
    - Defaults
      828
    - Parameters
      828
    - Help Messages
      828
    - Error Messages
      828
  - Output
    829
  - Feature Interactions
    829
- test link
  829
  - Synopsis
    829
  - Permissions
    829
  - Examples
    829
  - Description
    829
    - Defaults
      829
    - Parameters
      830
    - Help Messages
      830
    - Error Messages
      830
  - Output
    831
  - Feature Interactions
    832
- test maintenance
  832
  - Synopsis
    832
  - Permissions
    832
  - Examples
    832
  - Description
    832
    - Defaults
      833
    - Parameters
      833
    - Help Messages
      833
    - Error Messages
      834
  - Output
    834
  - Feature Interactions
    835
- test memory
  835
  - Synopsis
    835
  - Permissions
    835
  - Examples
    835
  - Description
    836
    - Defaults
      836
    - Parameters
      836
    - Help Messages
      836
    - Error Messages
      838
  - Output
    839
  - Feature Interactions
    839
- test modem-pool
  840
  - Synopsis
    840
  - Permissions
    840
  - Examples
    840
  - Description
    840
    - Defaults
      840
    - Parameters
      841
    - Help Messages
      841
    - Error Messages
      841
  - Output
    842
  - Feature Interactions
    843
- test network-control
  843
  - Synopsis
    843
  - Permissions
    843
  - Examples
    843
  - Description
    843
    - Defaults
      844
    - Parameters
      844
    - Help Messages
      844
    - Error Messages
      845
  - Output
    846
  - Feature Interactions
    847
- test packet-control
  847
  - Synopsis
    847
  - Permissions
    848
  - Examples
    848
  - Description
    848
    - Defaults
      848
    - Parameters
      849
    - Help Messages
      849
    - Error Messages
      849
  - Output
    850
  - Feature Interactions
    851
- test pkt
  851
  - Synopsis
    851
  - Permissions
    852
  - Examples
    852
  - Description
    852
    - Defaults
      852
    - Parameters
      853
    - Help Messages
      853
    - Error Messages
      853
  - Output
    854
  - Feature Interactions
    855
- test pms-link
  855
  - Synopsis
    855
  - Permissions
    855
  - Examples
    856
  - Description
    856
    - Defaults
      856
    - Parameters
      857
    - Help Messages
      857
    - Error Messages
      857
  - Output
    858
  - Feature Interactions
    858
- test port
  859
  - Synopsis
    859
  - Permissions
    859
  - Examples
    859
  - Description
    859
    - Defaults
      859
    - Parameters
      860
    - Help Messages
      860
    - Error Messages
      860
  - Output
    861
  - Feature Interactions
    862
- test pri-endpoint
  862
  - Synopsis
    862
  - Permissions
    862
  - Examples
    863
  - Description
    863
    - Defaults
      863
    - Parameters
      863
    - Help Messages
      863
    - Error Messages
      864
  - Output
    864
  - Feature Interactions
    865
- test processor
  865
  - Synopsis
    865
  - Permissions
    866
  - Examples
    866
  - Description
    866
    - Defaults
      866
    - Parameters
      867
    - Help Messages
      867
    - Error Messages
      868
  - Output
    869
  - Feature Interactions
    869
- test shadow-link
  869
  - Synopsis
    870
  - Permissions
    870
  - Examples
    870
  - Description
    870
    - Defaults
      870
    - Parameters
      870
    - Help Messages
      871
    - Error Messages
      871
  - Output
    872
  - Feature Interactions
    872
- test signaling-group
  873
  - Synopsis
    873
  - Permissions
    873
  - Examples
    873
  - Description
    873
    - Defaults
      873
    - Parameters
      874
    - Help Messages
      874
    - Error Messages
      874
  - Output
    875
  - Feature Interactions
    876
- test sp-link
  876
  - Synopsis
    876
  - Permissions
    876
  - Examples
    876
  - Description
    877
    - Defaults
      877
    - Parameters
      877
    - Help Messages
      877
    - Error Messages
      877
  - Output
    878
  - Feature Interactions
    878
- test spe-standby
  878
  - Synopsis
    878
  - Permissions
    879
  - Examples
    879
  - Description
    879
    - Defaults
      880
    - Parameters
      880
    - Help Messages
      880
    - Error Messages
      880
  - Output
    881
  - Feature Interactions
    882
- test station
  882
  - Synopsis
    882
  - Permissions
    882
  - Examples
    882
  - Description
    883
    - Defaults
      883
    - Parameters
      884
    - Help Messages
      884
    - Error Messages
      884
  - Output
    885
  - Feature Interactions
    886
- test synchronization
  886
  - Synopsis
    886
  - Permissions
    886
  - Examples
    887
  - Description
    887
    - Defaults
      887
    - Parameters
      888
    - Help Messages
      888
    - Error Messages
      888
  - Output
    889
  - Feature Interactions
    889
- test tdm
  889
  - Synopsis
    890
  - Permissions
    890
  - Examples
    890
  - Description
    890
    - Defaults
      890
    - Parameters
      891
    - Help Messages
      891
    - Error Messages
      891
  - Output
    892
  - Feature Interactions
    893
- test tone-clock
  893
  - Synopsis
    893
  - Permissions
    893
  - Examples
    893
  - Description
    893
    - Defaults
      894
    - Parameters
      894
    - Help Messages
      894
    - Error Messages
      894
  - Output
    895
  - Feature Interactions
    896
- test trunk
  896
  - Synopsis
    896
  - Permissions
    896
  - Examples
    897
  - Description
    897
    - Defaults
      897
    - Parameters
      898
    - Help Messages
      898
    - Error Messages
      898
  - Output
    899
  - Feature Interactions
    900
- test tsc-administered
  900
  - Synopsis
    900
  - Permissions
    900
  - Examples
    901
  - Description
    901
    - Defaults
      901
    - Parameters
      901
    - Help Messages
      901
    - Error Messages
      901
  - Output
    903
  - Feature Interactions
    903
- upgrade software
  903
  - Synopsis
    904
    - Simplex/Duplex
      904
  - Permissions
    904
  - Examples
    904
    - Simplex/Duplex
      904
  - Description
    904
    - Simplex
      904
    - Duplex
      904
    - Defaults
      904
    - Parameters
      905
    - Help Messages
      905
  - Output
    906
  - Feature Interactions
    907
    - System Restarts
      907
    - Initcauses
      908
    - Multi-user Contention
      908
    - Recent Change History Log
      908
    - Periodic and Scheduled Maintenance
      908
    - Error and Alarm Log
      908
    - Demand Busyout Objects
      908
    - Standby SPE Maintenance
      908
    - Disabled Objects
      908
9. Packet Bus Fault Isolation and Correction
910
10. Maintenance Object Repair Procedures
944
Index
2628

Benutzerhandbuch

Größe:

10,8 MB
Seiten:

2643
Language:

English

Handbuch öffnen