3M 78-8135-4385-3-A User Manual

 

18

 

78-8135-4385-3-A

17.1  Perform an air polish by holding the 9 micron lapping 

film firmly in one hand and gently moving the film in 

a circular motion for approximately 10 strokes or until 

approximately one half of the bead height is removed.

17.2  Using a lint-free cloth and isopropyl alcohol clean the 

connector after the air polish to remove all debris left 

by the 9 micron lapping film.

17.3  Clean the round polishing pad found in the 3M

™

 

Universal Hot Melt Kit 6365/6361 with a lint-free 

cloth moistened with isopropyl alcohol. 

17.4   Place several drops of alcohol onto the round 

polishing pad.

17.5  Before alcohol evaporates, place a sheet of the pale 

green 2 micron lapping film, shiny side down on the 

pad. The alcohol creates suction on the lapping film 

and helps hold it in place. 

17.6  Clean the lapping film with a lint-free cloth moistened 

with isopropyl alcohol.