Sportline 343 Leaflet

insulation strip. (Insulation strip

designed to preserve battery power)

Step Distance

Ideal Distance

#3482     

 

         

     ©2008 Sportline

06/18/08

The Talking Calorie Counting Pedometer 

has many features to enhance your 

walking or jogging experience:

1. Records steps, distance, calories burned 

and time with the special feature of 

having this information announced to 

you at the press of a button.

2. Auto Voice automatically reports 

steps, distance, calories burned and 

time when the preset goal function is turned on.

3. The ‘smart timer’ function can detect false steps so that only 

deliberate steps are counted.

1. Remove the plastic film from the LCD display on the front of 

the pedometer.

2. Open up the battery compartment to remove the battery 

protector tab to activate your pedometer.  See instructions 

on replacing battery to open the battery door.  

This pedometer can measure and calculate in four modes:  

Step, Distance, Calories and Time.

Step Mode shows the number of steps taken from 

0 to 99999.

Distance Mode shows the distance you have walked or jogged 

in either miles or km’s from 0 to 999.99 MI/

999.99 km.

Calories Mode shows the amount of calories burned from 0 to 

99999 kcal.

Time Mode shows the amount of time you’ve exercised from 0 

minutes to 999 hours and 59 minutes.

TALK – When pressed once will announce the information 

pertaining to the mode currently showing on the display.  

When held it will announce step, distance, calories and time in 

sequence starting from the mode currently displayed.

CLEAR – When pressed and held it will announce "All Clear" 

and reset all data to "O".

AUTO – Hold AUTO button down until you hear "Auto report is 

on" and you see (((.))) appear on the screen.  When the auto 

report is on, your pedometer will automatically announce your 

steps, distance, calories and time. (See below). If you hold the 

AUTO button down when the Auto Report function is turned 

on, you will then hear "Auto report is off" and the (((.))) symbol 

will disappear from your screen. Then it will no longer 

automatically announce the preset goals until you turn 

it on again.

MODE – The MODE button has two functions. Each time you 

press the mode button once it will take you to the next mode 

in sequence from Step, Distance, Calories, and Time. Your 

Pedometer will announce the mode you’re in each time you 

press it. The MODE button also is used to set your step length 

and weight into the pedometer when holding it down. You 

will hear "Enter your step length" when held down the first 

time. You will then hear "Enter your weight" when held down 

the second time. (See below for details on entering your step 

length and your weight.)

▲

– Allows you to increase step length from 10 inches to 80 

inches or 10 centimeters to 120 centimeters when entering 

your personal data. It also allows you to increase 

weight from 40 pounds to 300 pounds or 20 kilograms to 150 

kilograms when inputting your weight.

▼

– Allows you to decrease step length from 80 inches to 10 

inches or 120 centimeters to 10 centimeters. It also allows you 

to decrease weight from 300 pounds to 40 pounds or 150 

kilograms to 20 kilograms when inputting your weight.

1. First decide whether you want your pedometer to report 

your distance in miles or kilometers. 

2. Determine whether your pedometer is currently reporting 

data in the Imperial (Miles) system or Metric   (Kilometers) 

system. If already in desired system, you can skip to ‘Input 

Your Stride Length".

3. If you need to switch, press the MODE button to distance 

mode, then press the CLEAR (CL) button. Hold the CLEAR 

button for 5 seconds. You will hear two beeps signifying 

that the system has changed from "KM" to "MI" or vice 

versa. 

INPUT YOUR STRIDE LENGTH (ranges from 10 inches to 80 

inches or 10 centimeters to 120 centimeters):

                                       

1. Walk 10 steps.

2. Measure the distance that you walked either from 

heel-to-heel or toe-to-toe.

3. Divide by the distance covered to arrive at your 

stride length.

4. Example: If measured distance equals 360 inches and the 

number of steps taken was 10, your stride length equals 36 

inches.

IMPORTANT: Please remember that the length of your stride 

while walking is different than the length of your stride while 

running. If you plan to use this pedometer for both types of 

exercise, you will have to reprogram your stride length when 

you go from one to the other.

5. Hold the MODE button down starting from any mode until 

you hear "Enter your step length". The display will flash 

previous stride input in inches or centimeters. 

6. If you do not need to change the stride, press the MODE 

button again. Then skip to # 1 below. 

7. To change your stride length press either the 

▲

 button or 

the 

▼

 button until you reach your actual stride length. You 

can rapidly increase or decrease the stride length by 
holding down the 

▲

 and/or  

▼

.

8. When you reach your stride length press the MODE button 

again to set it into your pedometer.  

9. When pressing the MODE button in #8 to set your 

stride length, your pedometer will then announce 

"Enter your Weight".

10. The display will flash the previous weight input you set into 

your pedometer in either pounds or kilograms. 

11. If you do not need to change the weight, press the MODE 

button again to keep the same weight set.

12. If you do need to change the weight, press either the 

▲ 

button or the 

▼

 

button until you reach your actual 

weight information. You can rapidly increase or decrease 
the weight by holding down the 

▲

 and/or 

▼

.

13. Once you’ve reached the correct weight, press the MODE 

button again to set it.

1. Clip the unit to your belt or to the top of your shorts, trousers or 

shorts as close as possible to the crease line.

2. The pedometer must always be horizontal and parallel to 

the ground. If you attached it sideways or at an angle, false 

readings will occur.

1. Press the CLEAR button (CL) to clear out all data recorded 

previously. All readings will go to (0) and you will hear ALL 

CLEAR.  

2. Press the MODE button until you reach the desired mode 

you want to be in. It will display/announce the mode. If you 

keep pressing the button, it will announce the data in 

sequence. 

(Step, Distance, Calories and Time) simultaneously while 

the information is being displayed.

Your pedometer has been programmed with preset goals. If 

you want to use this feature simply hold the AUTO button 

until you hear "Auto Report Is On" and AUTOTALK will be 

displayed on your screen.

FUNCTION      

 

Number of Steps      

Every 1000 steps

Distance      

 

Every 0.5 miles or 0.5 km’s

Calories       

 

Every 50 calories

Total Time      

 

Every 10 minutes

To turn this feature off, simply hold the AUTO button again. It 

will say, "Auto Report is off." 

When your pedometer appears to be functioning abnormally 

(for example, the display reading looks strange or appears to 

be frozen or a button isn’t functioning properly), you need to 

reinitialize your pedometer. To do this use a thin, pointed 

object such as a paper clip to press the RESET button on the 

back of the pedometer. You will then need to reenter your 

stride length and weight.

If the sound weakens or the display dims or distorts, you need 

to replace the battery.  This pedometer uses one CR2032 

battery.  To install the new one:

Pedometer Back Side

1. Press tab to slide out.

2. Insert thin sharp tool, such as a small 

screwdriver or thumb finger nail, at 

location shown to straighten the 

compartment so it is parallel to the 

edge of unit.  (Pull battery door straight 

out from center direction as shown to 

pull out insulation tab.)

3. Remove the old battery and install a 

new CR2032 battery as indicated by the 

polarity symbols (+ and -) marked in 

the battery compartment.

4. Put the battery drawer back in place.

Note:  You will need to reenter your stride 

length and weight after replacing the 

batteries.

• Non-rechargeable batteries are not to be recharged 

• Rechargeable batteries must be removed 

before recharging 

• Rechargeable batteries only to be recharged under 

adult supervision 

• Do not mix alkaline, standard (carbon-zinc), or rechargeable 

(nickel-cadmium) batteries  

• Do not mix old and new batteries

• Exhausted batteries to be removed

• Do not dispose of battery in fire; battery may explode 

or leak

• Do not dispose of product in fire; battery may explode or leak

other than an authorized EB Sport Group personnel, or damage that is 

attributable to acts of God.

There are no express warranties except as listed above.

EB SPORT GROUP SHALL NOT BE LIABLE FOR INCIDENTAL OR 

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS 

PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.  ALL 

EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE 

LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

This limited warranty gives you specific legal rights and you may also 

have other rights, which vary from state to state in the USA.

Should you experience problems with this item, please return it to the 

point of purchase. This will not affect your statutory rights.  

Alternatively return it to the address shown below for a 

repair/replacement:  StarCase (UK) Ltd, Berkeley Business Park, 

Wainwright Road, Worcester WR4 9FA.

www.sportline.com

Sportline® is a trademark of SPORTLINE, a division 

of EB Sport Group, Yonkers, NY 10701

Distributed in the UK by 

StarCase  (UK) Ltd., Worcester, WR4 9FA

All Rights Reserved. ©2008

WV3482ISO1SPT

For products purchased in the United States: 

EB Sport Group (referred to as the "Warrantor"), will repair or replace 

this product with new or refurbished parts or product, at Warrantor’s 

sole option, free of charge, in the U.S.A. in the event of a defect in 

materials or workmanship for one (1) year from the date of original 

purchase. 

To obtain warranty service on your product or a replacement, you may 

return it to: EB Sport Group Customer Service, 4 Executive Plaza, 

Yonkers, NY, 10701, USA.

IF THE UNIT IS RETURNED FOR SERVICING, ENCLOSE $7.50 FOR 

POSTAGE AND HANDLING.  SEND YOUR UNIT INSURED TO OUR 

SERVICE DEPARTMENT.

This warranty does not cover damage which occurs in shipment or 

failures which are caused by other products not supplied by EB Sport 

Group, or failures which result from normal wear, accident misuse, 

abuse, neglect, mishandling, misapplication, alteration, modification, 

overloading the product beyond its rated capacity, using the product 

with an improper accessory or adjustments/repairs/service by anyone