Sportline 4282 User Manual
BUTTONS AND THEIR FUNCTIONS
2- REMOVING BATTERY INSULATOR TAB
3- BUTTONS AND THEIR FUNCTIONS
1- INTRODUCTION
Back cover
4202 PEDOMETER
USER GUIDE
/INSTRUCTION MANUAL
Congratulations on your purchase of a Sportline 4202 Pedometer. The 4202
Pedometer features a highly advanced pedometer technology that accurately
measures your body movements when worn from multiple locations on the body
and in multiple orientations.
Pedometer features a highly advanced pedometer technology that accurately
measures your body movements when worn from multiple locations on the body
and in multiple orientations.
Please keep in mind your pedometer is a sensitive technical instrument. With
proper care and maintenance, it will last for many years. However, improper care
and handling can cause the various sensors to be damaged and to stop function-
ing.
proper care and maintenance, it will last for many years. However, improper care
and handling can cause the various sensors to be damaged and to stop function-
ing.
HOW TO USE THIS MANUAL
Please read all sections of this manual carefully and become fully familiar with
the operation of the pedometer before using it in the fi eld. Proper setup and op-
eration will greatly enhance the pedometer’s usefulness and your enjoyment. The
steps for the programming or operation are adjacent to the screen illustration.
Key points and important information are shown in highlighted blocks.
the operation of the pedometer before using it in the fi eld. Proper setup and op-
eration will greatly enhance the pedometer’s usefulness and your enjoyment. The
steps for the programming or operation are adjacent to the screen illustration.
Key points and important information are shown in highlighted blocks.
CUSTOMER SUPPORT
If you have questions, comments or need assistance with your Sportline
Pedometer, you may contact Customer Support by calling 1-800-668-5593.
Pedometer, you may contact Customer Support by calling 1-800-668-5593.
NOTE: In order to activate your pedometer after purchase, you must remove the
battery insulator tab inside the battery compartment.
battery insulator tab inside the battery compartment.
1. Locate the tab on the lower edge of the pedometer.
2. Firmly grasp the tab and pull away from the pedometer until completely
removed from the unit.
3. Remove the label that appears on the pedometer display.
4202 PEDOMETER
www.sportline.com
www.sportline.com
Distributed by
ACI Brands Inc., 2616 Sheridan Garden Drive,
Oakville Ontario L6J-7Z2, Canada
All Rights Reserved. ©2013
SB1061IS02SCC
SB1061IS02SCC
Fold 1
Fold 2
Fold 3
Fold 3
Fold 4
5- PROGRAMMING THE PEDOMETER
The 4202 Pedometer allows you to set a goal based on STEPS or DISTANCE. Once
set, the % of Goal completed is then displayed at the top of the display.
set, the % of Goal completed is then displayed at the top of the display.
SELECTING STEPS GOAL
1. In STEP view (see “Viewing Pedometer Information” next panel), press the SET
button. The 3rd digit from the right will fl ash (100 Steps is the minimum range).
2. Adjust digit (increase) by pressing RESET.
3. Set and Advance to next digit by pressing SET. Continue through all digits.
Press MODE to exit the programming sequence.
SELECTING DISTANCE (MILES) GOAL
1.
In MILES view (see “Viewing Pedometer Information” next
panel), PRESS the SET button. “GOAL” will fl ash on and off in
the upper line of the display. PRESS the SET button again.
panel), PRESS the SET button. “GOAL” will fl ash on and off in
the upper line of the display. PRESS the SET button again.
2.
Adjust digit (increase) by PRESSING RESET. Set and Advance
to next digit by PRESSING SET.
to next digit by PRESSING SET.
3.
Continue through all digits. PRESS MODE to exit the program-
ming sequence.
ming sequence.
4- PROGRAMMING THE PEDOMETER
SETTING YOUR STRIDE LENGTH
In order to ensure exercise data is as accurate as possible, you must enter your
stride length (see “Determining Your Stride Length” on the opposite page).
stride length (see “Determining Your Stride Length” on the opposite page).
1. Access Distance (MILES or KM) view by Pressing the Mode button.
2. Enter the Programming Sequence by PRESSING the SET button on the back of
the unit. “GOAL” will fl ash on and off in the upper line of the display.
3. Press the Mode button. Stride length (default is 30 in.) will fl ash.
4. Adjust Stride Length (in inches) by PRESSING the RESET button (adjustment is
upward only). You can hold the RESET button to fast advance.
5. PRESS the SET or MODE button to accept value and return to Distance (MILES)
view.
1
1
2
2
3
3
To adjust value:
RESET
To accept and advance:
PRESS SET
6- VIEWING PEDOMETER INFORMATION
7- RESETTING PEDOMETER DATA
The 4202 Pedometer automatically begins capturing data once movement
occurs. There are no Start or Stop buttons to push.
occurs. There are no Start or Stop buttons to push.
Scroll between display modes: STEPS and DISTANCE (MILES) by PRESSING THE
MODE BUTTON. Your progress toward your Goal is expressed as a percentage in
the upper line of the display.
MODE BUTTON. Your progress toward your Goal is expressed as a percentage in
the upper line of the display.
TO CLEAR ALL CURRENT PEDOMETER DATA:
1. PRESS & HOLD the RESET button on the front of the unit.
2. When pedometer data reads zeros (O), RELEASE THE RESET button. The unit
is now ready for a new workout.
NOTE: Your Stride Length and Goal settings will be saved.
Scroll between display
modes:
PRESS MODE
1
2
The Sportline 4202 Pedometer has 3 buttons for operating and programming: MODE
and RESET located on the front of the unit and the SET button on the back of the
unit.
and RESET located on the front of the unit and the SET button on the back of the
unit.
MODE BUTTON
• Operating Mode: Scrolls through display modes.
• Programming Mode: Exits the Programming Sequence.
RESET BUTTON
• Operating Mode: Clears current pedometer data.
• Programming Mode: Adjusts variable being set.
SET BUTTON
• Operating Mode: Press & Hold to enter the Programming Sequence.
• Programming Mode: Accepts the information being adjusted and advances to the
next setting.
1
2