Impex MP 2100 User Manual

STEP 2    (See Diagram 2) 
A.) Place two 

∅

 2 ½” Rubber Bumpers (#65) on the Rear Base Frame (#2). Align the holes 

and insert Two Guide Rods (#18) through the holes into the Rear Base Frame. Secure 
each Guide Rod with one M10 x 1” Allen Bolt (#75) and 

∅

 ¾” Washer (#87) from the 

bottom of Rear Base Frame. 

B.) Slide 14 Weight Plates (#48) onto the Guide Rods. Make sure all Plates are facing the 

same direction.  Insert the Selector Rod (#41) through the center hole on the Weight 
Plates. Slide the Weight Selector Stem (#47) onto the Guide Rods. 

C.) Use the L-shape Pin (#40) to select desired number of Weight Plates to Exercise. NOTE: 

Each Plate weights 10 lbs. Please refer to the Weight Resistance Chart on page 24.