Hitachi 19VR11B User Manual
PREPARATION FOR USE
15
PREPARATION
FOR
USE
CABLE CONNECTIONS
VHF/UHF COMBINED ANTENNA
The VHF/UHF Rod Antenna (not supplied) is detachable. Push the stem of the
antenna into the hole which is located on the upper back cabinet of the unit.
Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the
ANT. terminal of the TV/VCR as shown in the diagram below.
For the best reception, extend the VHF/UHF Rod Antenna fully and adjust its
position. (Avoid handling the top section when making adjustments.)
antenna into the hole which is located on the upper back cabinet of the unit.
Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the
ANT. terminal of the TV/VCR as shown in the diagram below.
For the best reception, extend the VHF/UHF Rod Antenna fully and adjust its
position. (Avoid handling the top section when making adjustments.)
NOTE: Before plugging the Rod antenna into antenna terminal, check that the pin is not
bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal.
bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.