Hitachi 19VR11B User Manual
SEARCH
40
INDEX SEARCH
This feature provides a method of indexing the starting point. And you can easily
search the index mark in either fast forward or rewind direction.
search the index mark in either fast forward or rewind direction.
NOTES:
• The index mark will be made automatically when the REC button is pressed. It will also
be marked at the starting point of Timer recording and OTR.
• The index mark is not recorded if the PAUSE/STILL button is pressed and released
during recording.
• The time gap between making the index marks on the tape should be greater than 1
minute for SP recording, 2 minutes for LP recording and 3 minutes for SLP recording.
• Index marks cannot be made if the erase-protection tab on the cassette has been
removed.
• Index search can be set up to 20.
• This function is not operative in recording mode.
• Counter Memory function is not operative in this mode.
• You must use the remote control for this procedure.
• The index mark will be made automatically when the REC button is pressed. It will also
be marked at the starting point of Timer recording and OTR.
• The index mark is not recorded if the PAUSE/STILL button is pressed and released
during recording.
• The time gap between making the index marks on the tape should be greater than 1
minute for SP recording, 2 minutes for LP recording and 3 minutes for SLP recording.
• Index marks cannot be made if the erase-protection tab on the cassette has been
removed.
• Index search can be set up to 20.
• This function is not operative in recording mode.
• Counter Memory function is not operative in this mode.
• You must use the remote control for this procedure.
Make sure...
• Power must be turned on.
• Insert a tape.
• Power must be turned on.
• Insert a tape.
In the example below: You are watching fourth program (program number 4) and
want to fast forward to seventh program (program number 7). You must skip three
programs.
want to fast forward to seventh program (program number 7). You must skip three
programs.
1 Select "INDEX SEARCH" mode
Press MENU button repeatedly to point to "INDEX SEARCH".
Then, press SELECT button.
Then, press SELECT button.
2 Enter your desired number of program that you want to skip