Campbell Hausfeld IN629500AV User Manual

Operating Instructions and Parts Manual

www.chpower.com

Important Safety Information (Continued)

SPrAyIng PreCAutIonS

Do not spray flammable materials in vicinity of open flame

or near ignition sources including the compressor unit.

a. Do not smoke when spraying paint, insecticides, or other flammable

substances.

b. Use a face mask/respirator when spraying and spray in a well

ventilated area to prevent health and fire hazards.

c. Do not direct paint or other sprayed material at the compressor.

Locate compressor as far away from the spraying area as possible to
minimize overspray accumulation on the compressor.

d. WHEN SPRAYING OR ClEANING WITH SOlVENTS OR TOxIC CHEMICAlS,

FOllOW THE INSTRUCTIONS PROVIDED BY THE CHEMICAl
MANUFACTURER.

AIr SourCe

Air compressors providing air to the tank should follow the requirements

established by the American National Standards Institute Standard

B19.3-1991; Safety Standard for Compressors for Process Industries. Contact your air
compressor manufacturer for information.

SerVICe
a. Release air pressure from air tank by pulling safety relief ring before servicing or

replacing parts.

b. Service must be performed only by qualified repair personnel.

Never attempt to repair or modify a tank! Welding, drilling or any other

modification will weaken the tank resulting in damage from rupture or

explosion. Always replace worn or damaged tanks.

c. When servicing a tool, use only identical replacement parts. Use only authorized

parts.

NOTE: The

DANGER

WARNING

CAUTION

, and

NOTICE

notifications and instructions

in this manual cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.

SAVe theSe InStruCtIonS

Do not DISCArD