Emerson MMI-20011276 User Manual

1

This manual explains how to configure and use the Net Oil Computer application on the 
Micro Motion

®

 Series 3000 MVD platform (a Model 3500 or Model 3700 MVD transmitter).

This manual does not provide information on basic installation, configuration, and use of the 
Model 3500 or Model 3700 transmitter. For basic platform information and instructions, see the 
manual entitled Micro Motion

®

Use Manual. 

You can communicate with a Series 3000 device using any of the following communication tools:

•

The local display

•

ProLink II v2.5 and higher (ProLink II v2.7 recommended)

•

375 Field Communicator with the appropriate DD: 

To configure or use the NOC application, you must use either the local display or ProLink II v2.7.

This manual focuses on the use of the local display. Detailed menu flowcharts for the local display are 
provided throughout this manual and in Appendix A.

For general information on installing ProLink II and connecting to the Series 3000 platform, see the 
manual entitled Micro Motion

®

Use Manual. 

Table 1-1 lists the basic steps required to install, set up, configure, and use the Series 3000 device with 
the NOC application. Table 1-1 also identifies the manual in which the associated information is 
provided. Note that for some tasks you will need to use both manuals.