GE 20309 User Manual

12

Volume/Mute Control and Punch-Through

This remote lets you select which device Mode controls your 
Volume/Mute buttons. The remote is initially set for all device 
Modes to use their own Volume/Mute control if present. If the 
programmed code has no Volume/Mute operation of its own then 
those buttons will punch-through control to the TV Mode device 
without needing to change to TV Mode. 

Any Mode chosen for Volume/Mute control MUST have its own 
Volume/Mute function or the Volume/Mute buttons will do 
nothing.

Setting ALL Volume/Mute Control to any one Mode

This routine can set all Modes to “punch-through” to any one 
chosen Mode for Volume/Mute button control without the needing 
to change to that Mode. 

1.   Press and hold the SETUP button until the red indicator 

turns on, then release the button.

2.   Press and hold the MUTE button until the red indicator 

blinks off, then release the button.

3.   Press and release the desired Mode button (TV, VCR, 

etc.) for Volume/Mute control, the red indicator blinks 
then stays on.

4.   Press and release the MUTE button and the red 

indicator turns off. The red indicator will blink rapidly 
for three seconds if the Mode you have selected has no 
Volume/Mute control.  

All other Modes will now punch-through to your chosen Mode for 

Volume/Mute control.