GE RM94904 Leaflet
GE UNIVERSAL REMOTE INSTRUCTIONS
Below you will find the generic instructions for the majority of our GE Universal
Remotes for Manually Entering Codes, Using the Code Search Feature and Using
Remotes for Manually Entering Codes, Using the Code Search Feature and Using
the Sleep Feature (RM94902, RM94904 and RM94905).
If these instructions do not work for your particular remote please contact our
Customer Information Center at 1-800-654-8483 option 4 or
support@jascoproducts.com
for further assistance. Please have your remote
model or the bar code from the packaging available for the technician to assist
you.
you.
MANUALLY ENTERING CODES
1.
Manually turn on the device (TV, VCR, DVD, etc.) you wish to
program.
program.
2.
Press and hold the CODE SEARCH/SETUP button on the remote
until the INDICATOR LIGHT lights, then release.
until the INDICATOR LIGHT lights, then release.
3.
Press and release the button for the device you are programming
(TV, VCR, DVD, etc.). For AUX, press AUX then the device button
you are assigning to AUX. The INDICATOR LIGHT will blink then
(TV, VCR, DVD, etc.). For AUX, press AUX then the device button
you are assigning to AUX. The INDICATOR LIGHT will blink then
remain lit.
4.
Enter the three or four digit code for your device using the number
buttons in the GE Universal Remote. After your code is entered the
buttons in the GE Universal Remote. After your code is entered the
INDICATOR LIGHT will turn off.
5.
Aim the remote at the device (TV, VCR, DVD, etc.) and press the
POWER button. Your device should turn off.
Note: If your device does not respond to the first code listed,
repeat steps with the next code. If none of the codes listed for your
device work for your device or your brand is not listed, try the Code
Search method described below.
device work for your device or your brand is not listed, try the Code
Search method described below.
USING CODE SEARCH FUNCTION
If your TV, VCR, DVD, etc. does not respond after you have tried all the codes
for your brand or if your brand is not listed, try searching for your codes by
following the steps below.
If your TV, VCR, DVD, etc. does not respond after you have tried all the codes
for your brand or if your brand is not listed, try searching for your codes by
following the steps below.
1.
Turn on the device you wish to program.
2.
Press and hold CODE SEARCH/SETUP until the INDICATOR
LIGHT lights, then release.
LIGHT lights, then release.
3.
Press and release the device button for the device you are
programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will
blink once then remain lit. For AUX, press AUX then the device
button you are assigning to AUX.
programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will
blink once then remain lit. For AUX, press AUX then the device
button you are assigning to AUX.