Wayne 370700-001 User Manual
Operating Instructions and Parts Manual
WSA120
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
For parts, product & service information
visit www.waynepumps.com
© 2010 Wayne Pumps
370700-001 3/10
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
™
Wireless Sump
Pump Monitoring System
General Safety
Information
CAlIfORNIA PROPOSItION 65
This product or
its power cord may
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
SAfEty GuIDElINES
Read these rules and instructions
Read these rules and instructions
carefully. Failure to follow these
instructions could cause serious bodily
injury and / or property damage.
All wiring must be
performed by a
qualified electrician. The pump must be
installed in compliance with all local
codes and the National Electrical Code.
installed in compliance with all local
codes and the National Electrical Code.
READ & fOllOW All INStRuCtIONS
SAvE thESE INStRuCtIONS
DO NOt DISCARD
Installation
Always disconnect
the power source
before attempting to install, service,
relocate or maintain the pump. Never
touch sump pump, pump motor, water or
discharge piping when pump is connected
to electrical power. Never handle a pump
or pump motor with wet hands or when
standing on wet or damp surface or in
water. Fatal electrical shock could occur.
1. Unplug the sump pump.
2. Loosen the top nut on the float switch.
3. Slide the nut out of the way on the
2. Loosen the top nut on the float switch.
3. Slide the nut out of the way on the
float switch wire (Fig. 1).
4. Slide the float switch into the
mounting bracket (Fig. 1).
Description
a Flood alert™ Wireless Sump Pump
Monitoring System is designed to notify
the home owner of an immediate
problem in the sump pit. an alarm will
sound and a light will flash indicating
that the water level has risen within the
sump pit, and could potentially overflow.
Monitoring System is designed to notify
the home owner of an immediate
problem in the sump pit. an alarm will
sound and a light will flash indicating
that the water level has risen within the
sump pit, and could potentially overflow.
unpacking
after unpacking the unit, carefully
inspect for any damage that may have
occurred during transit. Check for
loose, missing or damaged parts.
The packaging includes:
inspect for any damage that may have
occurred during transit. Check for
loose, missing or damaged parts.
The packaging includes:
• 3V Lithium battery
• Transmitter
• Float switch assembly
• Receiver
• Transformer
• Float switch bracket
• 3 Zip ties
• Clip
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SaFeTy
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following:
very important to know and understand.
This information is provided for SaFeTy
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following:
Danger indicates an
imminently
hazardous situation which, if not avoided,
WILL result in death or serious injury.
WILL result in death or serious injury.
Warning indicates a
potentially
hazardous situation which, if not avoided,
COULD result in death or serious injury.
COULD result in death or serious injury.
Caution indicates a
potentially minor
or moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
cause damage to equipment.
1
2
figure 1 - Mounting float on bracket
T E C H N O L O G Y