Mitsumi electronic 13JX10 User Manual
16
1 PART NAMES
(2)
Dot matrix LED
Displays the station number set in the module.
Indicates the following during the offline or test mode.
Offline: "
Indicates the following during the offline or test mode.
Offline: "
"
Line test based on module parameter settings: "L.T."
Hardware test: "H.T."
Hardware test: "H.T."
(3)
Terminal block
Used to connect a Ver.1.10-compatible CC-Link dedicated cable. ( Page 32 WIRING)
The SLD and FG terminals are connected inside the module.
Because a two-piece terminal block is used, the module can be replaced without disconnecting the signal line
to the terminal block.
Before installing or removing the terminal block, power off the module.
The SLD and FG terminals are connected inside the module.
Because a two-piece terminal block is used, the module can be replaced without disconnecting the signal line
to the terminal block.
Before installing or removing the terminal block, power off the module.
(4)
Production information marking
Shows the product information (16 digits) of the module.
No.
Name
Description