Sunwave Tech. SRC-3000b User Manual
3.2 Code and Learn Setting Key
11
3.2 Code and Learn Setting Key
SRC-3000b is equipped with two functions, pre-code and
Learning Function, to get the right codes for your target
devices.
devices.
Pre-Code
You may configure all keys on SRC-3000b by entering
a specific four-digit code number. This may be the
a specific four-digit code number. This may be the
fastest way to program the SRC-3000b. To get the
specific code number, please refer to the supplied
pre-programmed code list.
However, it requires that the device you intend to
pre-programmed code list.
However, it requires that the device you intend to
program is included in the pre-programmed code
database. Some newer or less-common devices may
database. Some newer or less-common devices may
not be pre-programmed, and their codes must be
learned by using the Learning Function.
Learning Function
You can use this function to learn the IR codes
directly from another remote control. This function is
directly from another remote control. This function is
perfect for newer or less common devices. You can
also use the function if a certain key does not perform
the desired function after using the CODE function.
However, if you have the problem that the SRC-3000b
cannot learn your device codes, please refer to
the desired function after using the CODE function.
However, if you have the problem that the SRC-3000b
cannot learn your device codes, please refer to
“Troubleshooting” on page 36 or contact SUNWAVE.