Toshiba SL-9000N-FFR-CA User Manual
11. PROGRAMMING PROCEDURES
11.15 LON SYSTEM
11-24
11.15 LON SYSTEM
Menu Page: 2
Item No.:
Item No.:
4
The SL-9000 scales which consists of a master, satellites, and a backup master are connected each
other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.
other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.
ID# 1 is reserved for the master terminal.
ID# 2 is reserved for the backup master terminal or satellite terminal.
ID# 3 to 32 are for satellite terminals.
ID# 2 is reserved for the backup master terminal or satellite terminal.
ID# 3 to 32 are for satellite terminals.
Setting numbers other than the above results in an error.
4
<MENU>
Page 2
PROG.
ESC.
<MENU>
Page 2
Main
<MENU>
Yes
IN-LINE
↔
OFF-LINE
ENTER
m
ID #
Set the number of
scales in the system.
ENTER
DLL?
n
ID#: 1
p
m
No
◇
CHANGE
PLU
NOTES: 1. Before starting the above procedure, press the
key and enter IN-LINE
mode.
2. When installing the backup master terminal, set the master scale’s initial status
of #9-1 to 1.
3. Set ID # to all scales connected by LON cable.
4. When the display power is turned on, a satellite terminal is ready to receive data
4. When the display power is turned on, a satellite terminal is ready to receive data
from the master terminal.
5. After setting the ID #, turn the power switch OFF and ON again.